Tweet
Just playing on phoenix with my little lad and we couldn't get the smoke to work?
How do you do it?
like the coloured red arrows smoke not just exhaust
How do you do it?
like the coloured red arrows smoke not just exhaust
-
www.heli-extreme.co.uk a good club in south Sheffield
600n pro BeastX Align DFC head bls251, 3xbls451, align gov, 600d, 2in1
trex500, BeastX DS510 swash, Beast X cutr and carve head DS520 HK3026-1900, Align 425D blades, 5S4200 rev'trix, K&BDD dampers, AR6200
"450" superframeSTK, align DFC head v2tail, hk22281-8 on 3S 9650w9257gear commander 55A align 325D hitec digitals Tarot ZYX, AR6100e
MCPX kbdd tail and blades, miniaviation bats
Dont spend more flying models than it costs to fly for real -
I'm not sure but i think its the no.7 on the numeric key pad...
hope it helps...
Raptor 50 v2 - OS 50 Hyper - Spartan Quark - DS 650 - DX7
Raptor 50 Titan SE - Redline 53 - Spartan DS 760 - DS 650
Mini Titan e325 - Spartan DS 760 - 6100e - Huey Fus
Phoenix
Holder of 2 EGS
Need a DJ? www.soundmachinedisco.co.uk -
Hi,
First choose a powered plane, then when your on the flying field go into the model menu and select 'edit'. You'll now see the options for smoke.
Have fun !
Mike.sigpicComment
-
yes default is 7 key. but this will only work with IC planes and only comes in white - will not work with electrics or any helis.Velocity 50 (w/ Rossi R57) | Atom 500 | T Rex 450V2/Sport HybridComment
-
number 7 and go into the settings and you can have any colour you want to useTaort 450 pro v2 fbl
mz18
proud owner of 2 egs
sponsored by :
KBDD International Pilot
Comment
-
Go to..... Model>Edit>Extras...... Only works with powered aircraft.....Keybourd default 7 toggles smoke on/off.Graham
University of life. Studying cool .
HK 500GT, 450 (Scorpioned) Pro clone, TT Innovator MD530, Trex 450SE (Slowly being recommissioned) mCPx,
mSR MD500E, CX2, mCX, PKZ Micro Mustang (All gathering dust)
Phoenix, DX6i.
x2
Comment
-
no - can't get smoke - set a colour in edit model extra - tried loads of models all fixed wing with engines, hammered F7 and key 7 to no avail.
made sure display settings has smoke in highest quality.
Can someone confirm that it works in version 2.5t?Last edited by moyesboy; 21-11-2009, 10:40 PM.www.heli-extreme.co.uk a good club in south Sheffield
600n pro BeastX Align DFC head bls251, 3xbls451, align gov, 600d, 2in1
trex500, BeastX DS510 swash, Beast X cutr and carve head DS520 HK3026-1900, Align 425D blades, 5S4200 rev'trix, K&BDD dampers, AR6200
"450" superframeSTK, align DFC head v2tail, hk22281-8 on 3S 9650w9257gear commander 55A align 325D hitec digitals Tarot ZYX, AR6100e
MCPX kbdd tail and blades, miniaviation bats
Dont spend more flying models than it costs to fly for realComment
-
Yup, works fine in 2.5t
Try the Pitts Special It deffo works with that.
And the f16, and the Hawk trainer.Last edited by tiddler; 21-11-2009, 10:45 PM.Graham
University of life. Studying cool .
HK 500GT, 450 (Scorpioned) Pro clone, TT Innovator MD530, Trex 450SE (Slowly being recommissioned) mCPx,
mSR MD500E, CX2, mCX, PKZ Micro Mustang (All gathering dust)
Phoenix, DX6i.
x2
Comment
-
hmm, definitely not for me...
post a recording with it on and I'll see if it shows.
I have seen it on an onoline session as well.www.heli-extreme.co.uk a good club in south Sheffield
600n pro BeastX Align DFC head bls251, 3xbls451, align gov, 600d, 2in1
trex500, BeastX DS510 swash, Beast X cutr and carve head DS520 HK3026-1900, Align 425D blades, 5S4200 rev'trix, K&BDD dampers, AR6200
"450" superframeSTK, align DFC head v2tail, hk22281-8 on 3S 9650w9257gear commander 55A align 325D hitec digitals Tarot ZYX, AR6100e
MCPX kbdd tail and blades, miniaviation bats
Dont spend more flying models than it costs to fly for realComment
-
In the Model>Edit>Extra click on the smoke colour and check the opacity is up at 100%David
Kyosho Concept 30 still going just
T Rex 450 V1 GY401
T Rex 450 Pro FBL DFC AR7200BX
T Rex 600n compass FBL head Vortex N
Srimok 90N FBL VX1
A EGS for me shucks X 2 to treasure.
Comment
-
Here you go. Smoke_On_after_take_off.pxrOriginally posted by moyesboy View PostGraham
University of life. Studying cool .
HK 500GT, 450 (Scorpioned) Pro clone, TT Innovator MD530, Trex 450SE (Slowly being recommissioned) mCPx,
mSR MD500E, CX2, mCX, PKZ Micro Mustang (All gathering dust)
Phoenix, DX6i.
x2
Comment
-
No probs with smoke and 2.5t here either. Perhaps smoke isn't activating using the default key...
You could try going into System > Your Controls > (Select TX profile) > Edit
Under the Advanced tab, scroll-down until you see "Activate Smoke" - Check or change your Input from the drop-down...
For reference, smoke is mapped to key "S" which was set by choosing the "Keyboard key(s)" option as highlighted above.
Comment
-
Thanks D1zzy that was indeed the problem.
That interface changed since I setup the cheap tx that my son uses, and I hadn't been on with my DX7 where he smoke actually works.
The smoke activation was unmapped on my lads tx (now set to number7).
Thanks!www.heli-extreme.co.uk a good club in south Sheffield
600n pro BeastX Align DFC head bls251, 3xbls451, align gov, 600d, 2in1
trex500, BeastX DS510 swash, Beast X cutr and carve head DS520 HK3026-1900, Align 425D blades, 5S4200 rev'trix, K&BDD dampers, AR6200
"450" superframeSTK, align DFC head v2tail, hk22281-8 on 3S 9650w9257gear commander 55A align 325D hitec digitals Tarot ZYX, AR6100e
MCPX kbdd tail and blades, miniaviation bats
Dont spend more flying models than it costs to fly for realComment
Comment