Help please!

[163phil]

A friend of mine has recently bought a JR X-388S tx and is having trouble getting it to work with Phoenix (latest version). I've had a go by creating a copy of the nearest sounding JR tx and tweaking, but with very limited success

There seems to be a problem with the mixing somewhere and I'm damned if i can figure it out. (The tx is mode 2)

If anyone has got experience with this particular tx and can offer any help it'd be much appreciated

[Bugster]

I've used an elderly JR X3810 for nearly a year now with no probs on Phoenix and that's very similar to the 388. But I'm not on the latest version so perhaps that's the difference. I'm also mode 2 btw

[163phil]

If I remember rightly it's the pre-set JR X3810 that I used as the starting point in Phoenix - it's just the mixing seems different on the X3880, and I couldn't figure out how to turn it off or change it.

[rotorwrecker]

Hi.Have you tried a custom setup from scratch without using any current jr settings from other sets.I had problem a bit like this and custom sorted it.

Dave.

[daren]

Have you set the tx to ppm and the swashplate to one servo control?

[gazelle341]

I use a JR X-388S Tx with Phoenix. I am at work at present, but will have a look at my set up tonight and post the details on here.

Mick

[gazelle341]

Hi Phil,
In the transmitter main menu (UP+DN and power on), the two main settings on mine are:
Modulation set to PPM.F
Type set to HELI

In Phoenix I am using the JR X2610 Tx type and it seems fine with the X-388S.

If you require any other settings just shout

Mick

[163phil]

Many thanks guys - I'll get my mate to try out your suggestions. His name's Bingo (Chris) but seems a little shy I may even be able to get him to post direct

I'm sure he'll appreciate any help