Need Help, Phoenix has me stumped ???

[Fixxxer]

Got my interface sorted now but can't for the life of me get the damn thing to calibrate right. All channels are fine apart from the pitch (channel 6). It's acting like a switch, either on or off, there's no in between which is making things impossible. The radio's a JR 2610, no mixing is active and I have completely reset everything from the ground up so it's all as it should be. Radio works fine with reflex so I'm sure it isn't that..... any ideas folks ??

[Thomas]

I had the same with my SIM radio , a JR XP662, go to system menu, then your controls then configure profile - the pull down menus on the left mimic the radio wich makes it simple to configure.

[woody]

Got my interface sorted now but can't for the life of me get the damn thing to calibrate right. All channels are fine apart from the pitch (channel 6). It's acting like a switch, either on or off, there's no in between which is making things impossible.

When I had this problem on Saturday, it was because I hadnt calabrated the Tx properly. When it says put all sticks etc to the centre I hadnt done this with the left stick and when I corrected this (thanks Ade) it worked perfectly.

I cant be sure this is the problem (and what do I know ) but it worked for me.

Sue

[Fixxxer]

Sorted it, not sure what the problem was but after a complete un-install and re-install everything was as should be Thanks for the pointers tho.