twister tranny with pheonix!

[TomBCR]

hi guys! just bought the phoenix simulator and im using it with my transmitter that i got with my RTF Twister CP Gold! i have calibrated all my transmitter with the sim and all working quite well! it only really works ok when flying a heli, soon as i try to fly a plane it seems to go abit pear shaped! i think it had something to do with the ccpm mixing! ive been told to turn the tranny into plane mode to take all mixing off!

so my question is does anyone know how to turn the transmitter into plane mode? the manual that you get with the kit is proper shite and doesnt give you any sort of instructions at all!

any help would be great!
thanks again!

[tourerjim]

You need to set radio to aero but not sure if it can be done on that radio or asign another channel.

[nuttygt4]

You need to hold the two right hand buttons down, then switch the unit on, this will allow you to select a new model number and name it, also select if you want heli or fixed wing.

[Tweaker]

hi guys! just bought the phoenix simulator and im using it with my transmitter that i got with my RTF Twister CP Gold! i have calibrated all my transmitter with the sim and all working quite well! it only really works ok when flying a heli, soon as i try to fly a plane it seems to go abit pear shaped! i think it had something to do with the ccpm mixing! ive been told to turn the tranny into plane mode to take all mixing off!

so my question is does anyone know how to turn the transmitter into plane mode? the manual that you get with the kit is proper shite and doesnt give you any sort of instructions at all!

any help would be great!
thanks again!

I have the same problem with my E-sky Honeybee CP2 0406 35MHz 6 ch TX, its almost impossible to setup using all the advanced mode in Phoenix, the best result is just about usable on helis but on fixed wing as you pull up the elivator it also puts a roll in to the right which uses all the left stick ive got just to compensate. so now I use a 4 channel set without eCCPM on the Phoenix as I am still only just getting to grips with nose in hover and dont bother with 3D (sim) as I cant get idleup with the 4 channel set unless someone out there knows better and can let me in on how?

[TomBCR]

You need to hold the two right hand buttons down, then switch the unit on, this will allow you to select a new model number and name it, also select if you want heli or fixed wing.

wicked mate sorted it now thanks to you! all is sorted apart from my 3d switch and idle up now

did you use you twister tanny with pheonix?? if you did can you tell me how you calibrated your 3d switchs??

thanks for your help guys!

[heliTV]

... just to compensate. so now I use a 4 channel set without eCCPM on the Phoenix as I am still only just getting to grips with nose in hover and dont bother with 3D (sim) as I cant get idleup with the 4 channel set unless someone out there knows better and can let me in on how?

My lad (heli_tv_jr) uses the 4 ch CX2 Tx with Phoenix - it has no idle up switch so he uses a keyboard shortcut. You can set it up in the "Your controls" menu option... change it from unmapped to some convenient key...

[TomBCR]

wicked! thanks for that! been trying for hours to try and work somthing out!

pheonix is an awsome sim! do you think its accurate enough to get really good on the sim then do the same out on the field in real life??

thanks for the help once again!!
Tom

[Tweaker]

My lad (heli_tv_jr) uses the 4 ch CX2 Tx with Phoenix - it has no idle up switch so he uses a keyboard shortcut. You can set it up in the "Your controls" menu option... change it from unmapped to some convenient key...

I have done the same, spent hours reading threads, read yours minutes later had Idle up switched on and experienced my first inverted crash, yet another way to kill my heli. it still feels bad even on the sim.
Hey Ho. I will get the hang of this.

Thanks a lot pal
Tony