Phoenix help

[handthrottle]

Hi All
Just rcvd new futaba plug FREE from Phoenix after the year was up, Thank you Phoenix. Went to 'play' again and I cant get it to fly, have recalibrated it and all I get is the motor starts and spools up a bit and then it just topples over to the left and dies a death, if I jiggle the numbers in the box it just topples over to the right!! when I go into 'edit' all the figures in the boxes are 0 in the left hand boxes and 100 in the right hand boxes I have an x in throttle and an x in collective pitch and the tail rotor is halfway across in red. It was working great before?? If you can help please keep simple.....very simple. tks

[Balders]

oops, didn't read your post correctly, was gonna ask about calibration

[steelie600]

youve got ccpm enabled on tranny turn it off

[handthrottle]

Got the controls working normally now......tks Steelie.......
Now its the throttle!! Everything is in standard mode....ie 0 on one side and 100 on the other. Problem now is that it does'nt spool up until throttle stick is centre and then it just shoots right up into the sky.....no lower speed, if I try to bring the speed down it just stops and falls to earth, no slower speed for hovering. Sorry I keep going on but it is frustrating when you dont know much!!
o

[Made2Fade]

Try disabling the governor on the model your using. The reason why the throttle goes high straight away is because this is enabled. The governor is keeping the headspeed at a set level. If its shooting straight up into the air then the collective pitch channel may need reversing also.
Cheers
Lee

[handthrottle]

Lee! Your a diamond......working perfectly now, Collective pitch was already reversed....it was that bl**dy Governor. Many many tks. Going to have a play now.

[Made2Fade]

Easy when ya know how m8
Glad you got it sorted but...
just when ya sorted things and they bring Beta 'F' out pmsl
Ill be online hosting multiplayer sessions later tonight if you get a chance.
Cheers
Lee