Announcement

Collapse
No announcement yet.

Phoenix on laptop

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Phoenix on laptop

    Just been given a laptop HP Pavillion with a p4 processor. Loaded Phoenix on it and set up my tx etc. Calibrated ok, but it wont start when I try to fly. It's as though its paused. Running xp and it works fine on my desk top machine. Have set all the display settings ( Shadows, scenery etc) to low. Help.
    Last edited by Dave Parry; 06-09-2008, 12:07 AM.

  • #2
    Whats the GFX card on the Laptop and have you installed DX9 and latest Video drivers etc? got a model number ont he laptop? post and we can check its spec etc.
    ONE Eddie Gold Star!

    Kinross Radio Model Flying Club

    Comment


    • #3
      The model no is ZV5014EA
      Graphics card is ATI mobility Radeon 9000 IGP
      Processor is Pentium 4 2.4 Ghz
      As Its not connected as yet to the internet, will download drivers on main pc and install them.
      Not sure if DX9 installed, did check to install but again will download and re install.

      Comment


      • #4
        ok I just checked, Phoenix's minimum system requirements are as follows,

        Phoenix uses a highly optimised engine to try and provide great quality graphics and realistic physics on a wide range of computer systems. Currently we recommend the following as a minimum specification for running Phoenix:
        - Microsoft Windows 2000/XP/Vista
        - 1.0 Ghz Pentium 3/4 or AMD Athlon/64 compatible processor
        - 256MB system memory (RAM)
        - 750MB free, uncompressed hard-disk space*
        - ATI Radeon 9600/NVidia Geforce Ti4200 with at least 128MB memory
        - Microsoft DirectX 9.0c or higher*
        - CD-ROM/DVD-ROM Drive for installation
        - 1 free USB 1.1/2.0 port
        - 100% DirectX 9 compatible sound card (optional)
        The ATI onboard GFX card looks like its probably set to 64MB and needs at least 128Mb.

        Yopu could try increasing the amount of system ram available to the GFX card in the Bios but it might not have the oomph to run Phoenix.
        ONE Eddie Gold Star!

        Kinross Radio Model Flying Club

        Comment


        • #5
          Heres the spec of your laptop as standard,

          General

          MPN: DU977E
          System Type: Notebook
          Built-in Devices: Stereo speakers
          Width: 36.2 cm
          Depth: 28.4 cm
          Height: 4.6 cm
          Weight: 3.7 kg
          Processor

          Processor: Intel Mobile Pentium 4 2.4 GHz
          Data Bus Speed: 533 MHz
          Features: Enhanced SpeedStep technology
          Cache memory

          Type: L2 Cache
          Installed Size: 512 KB
          Ram

          Installed Size: 512 MB
          Technology: DDR SDRAM
          Form Factor: SO DIMM 200-pin
          Storage controller

          Type: IDE
          Storage

          Hard Drive: 40 GB - 4200 rpm
          Optical storage

          Type: DVD+RW
          Card reader

          Type: 5 in 1 card reader
          Supported Flash Memory Cards: SD Memory Card, Memory Stick, Memory Stick PRO, MultiMediaCard, SmartMedia Card
          Display

          Display Type: 15" TFT
          Max Resolution: 1024 x 768 ( XGA )
          Widescreen Display: No
          Video

          Graphics Processor / Vendor: AGP 8x
          Video Memory: Shared Video Memory (UMA)
          Audio

          Audio Output: Sound card
          Compliant Standards: Sound Blaster Pro
          Input device(s)

          Type: Keyboard, touchpad


          I'm not convinced that Phoenix will run on it I hope thats not what you bought it for.
          ONE Eddie Gold Star!

          Kinross Radio Model Flying Club

          Comment


          • #6
            Try turning the water detail to zero, on many machines this is often the difference to it working or not.
            sigpicWayne AKA OB1

            Inherit the Wind - Wilton Felder 1980, Smooth Jazz-Funkin' & Flyin' in the Fens

            Blade CX2 / Trex 250SE / Trex 450 SE V1 / Trex 500esp / Trex 600 Nitro Pro / Raptor 30 V2 / DX6i / DX7 / Phoenix / Ripmax twin Dock PSU / Cellpro 10S & 4S / Imax B6 x2.
            Prankster Nitro / Delta Push Prop / Swift 2 Flying Wing x3 / Swift 2 (Night Flyer LED Lit) / Swift Maxi Wing / Squall 4S/ HZ Ember / Wot 4. (all 2.4ghz)
            Plus 3 Eddie Gold Stars, yay!
            Trex 450XL - Destroyed due to complete power failure at height.

            Joint second best sites on the Web:-
            http://www.vinylmorpher.co.uk/
            http://www.soulandfunkmusic.com/

            Comment


            • #7
              Thx for replies, Have tried reloading updates etc and turned water off, system ram is 128mb. Still wont run, but do get occasional "farty" noises (not from me !!) as though its trying to run, so its probably not powerful enough and not going to work.

              Didnt get it just for phoenix, but thought it would be nice to use it. Didnt buy it, had it given, so cant complain.

              Comment

              Working...
              X