12FG and phoenix...

[Disc]

Okay give in how do I get these 2 to work together


Got a new 22" widescreen monitor and would like to try the sim out again but the new tranny has me stumped yet again

12FG and Phoenix how/when/what/got no idea here

I have the Square futaba lead for the sim was used with my 9cap

[Symon]

You need to set a new model on your TX and set the the swash to H1 (I think it's that as my 12FG isn't at hand).

Then goto 'your controls' in Phoenix and select a model close to yours (I use the 9C as 12FG isn't there). Sort out the servo directions etc.

Configure the stick movements in 'your transmitter'.

That should get you going. You can configure your switches to do other things too.

[Disc]

ah but what do I set the granny to transmit? 2.4 or 35mhz?

[robgt]

You shouldn't set it to transmit at all, should you?
Cheers,
Rob

[Andy from Sandy]

From using a 9C you also need to set the tx type to ppm that is in the parameter menu. Hopefully when you plug the cable in it will turn on the tx but not the tx module. In other words do not use the on/off switch to turn the tx on.

[Symon]

You need to set a new model on your TX and set the the swash to H1 (I think it's that as my 12FG isn't at hand).

Then goto 'your controls' in Phoenix and select a model close to yours (I use the 9C as 12FG isn't there). Sort out the servo directions etc.

Configure the stick movements in 'your transmitter'.

That should get you going. You can configure your switches to do other things too.

Ah yeh right Sorry...forgot about that.

It transmits in training mode. Go to the 'System Menu' and go to 'trainer'. Active to on and select student. I haven't got mine with me but I'm sure it's student. Otherwise select teach.

It doesn't really matter what channels you select here as it's only the sim trainer.

When you switch the model on (if it's on your sim model) it will indicate it's in training mode [edit] As EvoAndy says...it's like all futabas...it comes on automatcally when the plug is popped in.

[Disc]

I think I had to turn on the 9c even for the sim

I'll have a look at it shortly and reboot into Naff XP

[Disc]

Guys,

Thanks for the help the 12FG and sim now work together just about worked it all out need to work out why my throttle hold doesn't work and why the model is always in idle up although i have not set idle up at all!!!

Told the Tranny I'm the student and seems to work fine although I have to turn my Tranny on to work the sim at all.