idle up

[oneandonlyian]

trying to set up for inverted flight on phoenix but nothig seems to work for idle up V curves either on phoenix settings or dx6i throttle and pitch curves.
am new to this stuff so go gently.

Any help much appreciated. thanx

[Vibe]

If you have the idle-up setup on your TX correctly then it should work in Phoenix without any extra setup needed.

If you enable the idle-up, and look at the System > Your Transmitter menu, does the bar which moves with your throttle-stick (usually bar 1) move in a V-curve?

[oneandonlyian]

pitch curve is linear on tx on idle up is that right

[darryl]

yes thats correct.. throttle curve should be in the shape of a V or U so you have full throttle at low stick and at high stick in idle up 1.

Hope this helps

[oneandonlyian]

something must be wrong somewhere if i go -stick i get + pitch heli goes up not down.( in idle up)

[darryl]

the pitch curve should as a rough guide start in the bottom left of the graph climbing diagonally to the opposite corner top right. Either that or the calibration hasn't been done right on the TX??

Hope this helps

[oneandonlyian]

lol still not right do i have to change swash type on tx. tried recalibration everything seemed o.k there.
sorry to be pain

[Mike W]

Just out of curiosity ... have ya changed the pitch range of the heli that ya flying in phoenix ??? .... change it to -11 +11 in the edit aircraft section ... I had the same thing til ya set the heli in there how u want it ....If ya Tx settings are ok then its likely to be a setting in phoenix and not ya Tx ya need to sort

[oneandonlyian]

will try that mike how was work

[Mike W]

boring lol... mind u i snuck off early as was at the hospital this morning hehe ... just looking at the weather for this week .. I wanna crash .. .ooops i mean fly lol...

[oneandonlyian]

t rex 600 nitro already has those settings.
Next idea

[Mike W]

u have got idle up enabled on it ??? on the Tx i mean lol ....

[oneandonlyian]

trex 600 nitro already set +- 11.
any more ideas

[oneandonlyian]

erm i dont no

[Mike W]

dont know spekky radios that well but it sounds like ya not got idle up enabled on it as if ya got a V curve for throttle and a linear curve for the pitch then it shud work ..... pitch curve shud be something like 0,25,50,75,100 and try a V throttle curve of 100,65,48,65,100 for throttle then see what happens with the sim .... if its enabled when ya hit the idle up ya shud be able to go inverted with it