how to set up a sanwa tx on phoenix

[crap pilot]

Hi ive got a sanwa rd 6000 and am having trouble setting up on phoenix I cant get the sticks to do what they are supposed to do I cant find the sanwa on the list of transmitters . HELP

[jboweruk]

Okay, I take it you actually got it to plug in and work okay? If so then you will need to calibrate your controller, and set it up as a custom model. Calibration is the key, does it have ccpm mixing built in?

If so you will need to do advanced calibration, if it can either turn off ccpm or is only 4 channel then normal calibration will do, but you won't do a thing with it until you do that, even if your tx was listed, my DX6i needed serious calibration and that was listed. I'll post again in a few minutes when I've checked how to do custom set up.....

[jboweruk]

Okay, tis easy, go to the System Menu, and select your controls, then you will be presented with a list of controllers, next to that on the right select 'new', this will take you to a screen that offers basic or advanced setup, and allows you to name the new control set, just experiment with it until the controller behaves the way it should, then you should be fine.

Any probs let us know, one of us can help.

[crap pilot]

hey thanks for that got it going now

[jboweruk]

glad to hear it m8, have fun....