T-Rex 600 nitro on Phoenix - settings???

[HiltonSteve]

Took my 600 nitro out again yesterday for its 6th outing and I am now getting more confident with it, did some circuits, backward flying, loops, hovering nose in, side on and a bit of basic inverted stuff.

Question is that when I got back home i went on to Phoenix with the same heli (T-Rex 600 nitro pro red) and flew on there but it felt like slow motion and a lot easier to fly, being fairly new to flying i would like Phoenix to be a little closer to the real thing so does anyone have a .fly file that they use or settings that they recommend.

600 Spec -

T-Rex 600 Nitro pro
Os50 Hyper
Align muffler
Coolpower 20%
Revlock 10 (currently set at 1800 HS)
Align 2 in 1 reg with 2000mah lipo (6v)
GY401 with 9254
Futaba 9452's on cyclic
Spektrum DX7

TIA.

Steve.

[barney]

The quickest way is to increase the sim speed..around 110% is good...gravity is a little too soft for my taste.

You may also want to increase the Cyclic rates a bit and remove Expo.125%-140%. I use the 140% online as the connection speed seems to slow the model on my PC

I prefer to switch the Autozoom to OFF, and then Zoom in on the Model itself a small amount via my Mouse wheel. Brian