Announcement

Collapse
No announcement yet.

Futaba 7c 2.4 fasst. setup

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Futaba 7c 2.4 fasst. setup

    Is there a way of switching the CCPM mode off in my Tx.
    and does anyone have any idea of the settings i should set my unit up in to work correctly on the phoenix.
    any help greatly appreciated.
    Cheers all
    The Fleet

    SAB Goblin 500 sport. (in build)
    XK K110 on its way. Arrived and superb
    Blade MCPX (just about airworthy)
    Trex 450 Pro on Brain 2
    Raptor 30 V2. Converted to electric with Quick UK conversion
    Mini Titan super Cobra ah1
    Alien 550 Quad.3DR Pixhawk
    Futaba 7C 8FGS 14SG
    Specktrum DX6i
    Hovered by me,flown by my boys Nicholas and Edward.
    Cheers,
    Paul

  • #2
    ya need to go to settings and parameters ... then ya need H-1 heli which is mechanical setup for the swash ....pitch curves do linear 0-25-50-75-100
    throttle ...100-80-60-80-100 these are for idle up 2
    just work thru ya menus and for the servo reversing or not and try each one .. its a sim so ya cantcrash n e thing As for the rest just have a play and see which works best for you
    it all depends also if ya want to hover centre stick or above it there are soo many variables i can post all my setting for my tx that i have for phoenix in mine later if ya like ... just bout to go out ... or someone else with the same unit will help ya ...
    Knight 3D
    http://northeast3d.talkheli.co.uk/
    http://www.lindensflyingclub.co.uk/

    Comment


    • #3
      Cheers Mike,it would be good if you could post your settings,so i have a starting point.
      Will i need to trim the heli or does the calibration process take care of that,the reason i ask is i am having trouble just hovering the heli.
      The Fleet

      SAB Goblin 500 sport. (in build)
      XK K110 on its way. Arrived and superb
      Blade MCPX (just about airworthy)
      Trex 450 Pro on Brain 2
      Raptor 30 V2. Converted to electric with Quick UK conversion
      Mini Titan super Cobra ah1
      Alien 550 Quad.3DR Pixhawk
      Futaba 7C 8FGS 14SG
      Specktrum DX6i
      Hovered by me,flown by my boys Nicholas and Edward.
      Cheers,
      Paul

      Comment


      • #4
        all i did with mine was copy a normal heli i run over to the settings then just tweaked about to get it right ... i normally run bout 23-27% expo so just click on that one on the settings for phoenix and here are the rest of my settings i use
        dual rates ... 100/50% and expo -027 over both dual rates fixed to switch D
        no subtrim
        reverse ... all normal apart from channel 7 which is reversed
        thats the first menu ...now the second menu
        throttle curves ... normal=0,25,48,70,100 idle 1=100,75,50,75,100 idle 2= 100,80,70,80,100
        pitch curves....normal=45,57,76,81,100 idle 1=30,40,50,70,100 idle 2=0,25,50,75,100
        no mixed of n e sort enabled ...gyro up A50% dnN50%
        throttle hold on switch G
        These are just roughly set, phoenix seems to take care of the rest .... If ya put expo in it will dumb the centre stick down a little so its not as mental lol
        Knight 3D
        http://northeast3d.talkheli.co.uk/
        http://www.lindensflyingclub.co.uk/

        Comment

        Working...
        X