Phoenix/new Spektrum DX6 help please

[BigBadDom]

H guys, I've just calibrated my new DX6 with the latest version of Phoenix. I used the DX8 setting on Phoenix as this seemed to match stick inputs best (there is no new DX6 option).

All works as it should - hold button, flight mode, stick inputs, expo settings etc. One problem: in Normal flight mode Phoenic is seeing 0 throttle but is not seeing the throttle curve (set as 0, 25, 50, 75, 100). It is going straight to a governed headspeed around 100%.

Ive checked the DX6 inputs on screen and the throttle stick input is being recognised in normal mode, as is my 95%/100% headspeed in Idle 1 and 2.

So how do I get Phoenix to recognise the throttle speed from my throttle stick in Normal flight mode?!

My previous DX6i and DX8 worked, so I am not sure what im doing wrong!

Cheers
Dom

[jahk20]

you need to reset all settings. setup as a new transmitter by creating a new profile, as you normaly do and check to see on what channel is your throtle. It may be that you need to invert the chanel. I had the same proble with the dx6i.

[trexamanic]

i see spamming here to get to 50 lol