phonix-dx6i setup

[brin]

i have lust loaded phoenix and going through the setup menu it has said that transmitter should be in ppm mode how do this i cant find this in the manual am i being blind pls help

brian

[Disc]

i have lust loaded phoenix and going through the setup menu it has said that transmitter should be in ppm mode how do this i cant find this in the manual am i being blind pls help

brian

LOL your on 2.4ghz PPM doesnt apply to you


PPM is 35mhz

[brin]

thought it was to easy got my t-rex on the screen and the controls are in reverse
aaaaagh ,up is down ,down is up ,left is right ,right is left, forward and backward is ok.
it looked like it was callabrated ok on the setup screen what am i missing also can anyone suggest some settings for a beginner for t-rex 450s on dx6i pls help

brain

[brin]

thought it was to easy got my t-rex on the screen and the controls are in reverse
aaaaagh ,up is down ,down is up ,left is right ,right is left, forward and backward is ok.
it looked like it was callabrated ok on the setup screen what am i missing also can anyone suggest some settings for a beginner for t-rex 450s on dx6i pls help

bran

[Disc]

thought it was to easy got my t-rex on the screen and the controls are in reverse
aaaaagh ,up is down ,down is up ,left is right ,right is left, forward and backward is ok.
it looked like it was callabrated ok on the setup screen what am i missing also can anyone suggest some settings for a beginner for t-rex 450s on dx6i pls help

brain

Okay pitch leave alone and throttle curve 0,25,50,75,100

Idel up 1 leave pitch alone,

Throttle Curve 100,80,80,80,100

Try that for now

(reverse controls in tranny if you must but you shouldnt need to...)

[jboweruk]

Are you sure you picked the right TX from the list? Which version of Pheonix are you running? In one of the updates they have included DX6i tranny

[brin]

Okay pitch leave alone and throttle curve 0,25,50,75,100

Idel up 1 leave pitch alone,

Throttle Curve 100,80,80,80,100

Try that for now

(reverse controls in tranny if you must but you shouldnt need to...)

sorry disc ,still a bit confused all the bits on phonix were reversed ,managed to sort them out and i was flying quite well for a newbie but it all went tits up after changing some things to slow things down but there are things on there that are a bit vague to me like duel rate
gyro settings plus or minus throttle curve etc .i recalibrated my dx6i
but the controls ain't doing what they are supposed to i shall try again soon also my t-rex is still in the box waiting for my full attention
i can see by looking at all the bits i wont get much sleep for a wile any tips on where to start many thanks,

brian

[HeLiAdIc]

sorry disc ,still a bit confused all the bits on phonix were reversed ,managed to sort them out and i was flying quite well for a newbie but it all went tits up after changing some things to slow things down but there are things on there that are a bit vague to me like duel rate
gyro settings plus or minus throttle curve etc .i recalibrated my dx6i
but the controls ain't doing what they are supposed to i shall try again soon also my t-rex is still in the box waiting for my full attention
i can see by looking at all the bits i wont get much sleep for a wile any tips on where to start many thanks,

brian

Make sure you have the swash set up for 1 servo only, then see how ya go...

[BobJ]

Hello

Make sure you have a new blank model memory selected on your transmitter, that it's then in heli mode but NOT CCPM!
There are two DX6 radio's listed in the Sim, make sure you select the DX6i as this is a completly different radio to the older DX6.

Cheers
Bob J