Blurry crash on water scenes

[mark lane]

Hi,

My Phoenix runs fine on all the land scenes but throws a wobbly on anything with water.

do i need to turn anything down in particular to get it to run?

also should i run the DX7 mode on expo or no expo for practice with the 600n?

[Boggy]

run expo or not is totaly your preference mate which ever your comfortble with!
if you go into system settings there is a display menu in there you will find water quality set that to low it may help. if not set them all to low and see how you get on!

[mark lane]

run expo or not is totaly your preference mate which ever your comfortble with!
if you go into system settings there is a display menu in there you will find water quality set that to low it may help. if not set them all to low and see how you get on!

Thanks Ron... will give that a go. The heli feels more tight on the sim without expo and i it only softens out your poor control anyway. I would like to feel all inputs were my doing so do speak!

On the water thing... we don't really like water being helipilots but i don't like it when something isn't working!! wondering does the heli smash up or splash when you hit the water!!

I'm getting all my crashes out of the way before flying my new 600!!

[robgt]

If it's deep enough the heli will splash and sink (sometimes if it's not deep enough too )
In the very shallow stuff it usually splashes and rolls about a bit.

Cheers,
Rob

[Boggy]

and if you sink it slowly in deep water tail down, it will catapult out in bits ....its great!!!!!