Help!!!!

[silverspeed]

I have a DX6i and I am having problems calibrating! I have downloaded the updates for the DX6i and selected them as my transmitter but as I move the throttle up and down to calibrate 123 bars move and when its not going to plan with the other movements as well!
I have tried the Trex but all it does is fall over when I give it power!

Your help is needed

Speedy

[jboweruk]

I won't be able to look until tonight, are you using basic calibration or did you use advanced? If you used advanced then it's a 'mare, just try the basic calibration. And you may need to reverse a few things, set your tranny up with a specific model for Phoenix as well. As I say, I'll try and look tonight for you and see if I can use the DX6i with mine, up till now I've been using straight DX6 as the tx in the sim.

[flatspins]

Have you got it set as Heli?

Have you got the swash set to normal(1 servo)
Not 120 degree ccpm(3 servo`s)?

Transmitter settings,
Not Phoenix settings

[jboweruk]

Okay, shouldn't be an issue, nothing reversed at all. Swash as stated 1 @ 90 degree. heli should just lift, definitely try just basic calibration.