The best way to use Phoenix?

[GizmoB73]

I have Phoenix and use the Blade 400 3d model with my DX7 with it on a new model setting.

The question is, what is the best way to set things up for both the transmitter and the settings on my heli?

For example I realise the CCPM de-mixing does work to some degree but is not the best. Also I see that there are expo settings on the heli models as well as the DX7. Is it worth setting the throttle and pitch curves in the TX to match those in my heli model and will it make it more realistic?

Are there any things in general that I can do to make the sim as close to my real heli/tx configuration?

Thanks

Gary.

[GizmoB73]

OK, the frustration of writing the above thread, caused me to do a little more digging.

I copied & edited the Blade 400 3D model and entered the actual phsyical pitch range of my heli. I then entered the throttle & pitch curves (and Expo & D/R) used on the DX7 for my heli into the model memory for the sim. Things are now a lot more like I would expect them to be.

I also turned off the rotor governor.

Is there anything else I could do to make things more realistic?

I have noticed that the tail is rock solid on the sim, is there a way to map these settings from the model to make them more real?

Apologies for the noob questions.

Thanks

Gary