Phoenix v 3.0.1 problem

[pragmatist]

Hi,

I am running Phoenix with my Spektrum DX8 and have set everything up and calibrated as stated. Everything is fine bar the throttle, it shows on the edit controls graphic that it is running smoothly however from idle, even a slight amount of throttle and off it goes into the heavens turning the copter into a small dot and to bring it back down i have to cut the throttle completely.
Any idead would be appreciated as it's unusable like this.
Matt

[Dan22]

Hi Matt
Mine did the same. On the DX8, go into sevo set up & reverse the throttle.
Hope this helps

Regards,
Dan.

[pragmatist]

Great, will try, thanks Dan.

[pragmatist]

Yeah tried that and all it did was indeed reverse the throttle, the problem stiull remains, throttle goes from nothing to all out!!

[Dan22]

Yeah tried that and all it did was indeed reverse the throttle, the problem stiull remains, throttle goes from nothing to all out!!

If its shooting up in the air, then try reversing the pitch.
Or recalibrate the TX
Dan,