heli set up on the sim

[wiseman]

got my sim through the post today, im pleased with the set up every thing working how it should, just would like to know from you experts, do I replicate all the settings I have in my DX6i for my Trex450 which im comfortable flying with into the channel im flying my sim from ie model no 10

[vinny155]

No,everything's done on screen in phoenix,

[wiseman]

ok cheers mate

[wiseman]

any decent guys out there that are prepared to help out by sending me some settings for the phoenix on screen setting for a align trex450, im having a right sh*£%% trying to get mine to fly proper. the DX6i is set up following the net and all the controls are good, its just inexperience guys with the sim..

[vinny155]

whats wrong with it,is it too slow or too fast,there are lots of different parameters that you can mess with in phoenix,the only setting i change is the beginner/intermediate/pro one in model edit screen

[wiseman]

with full throttle I can only get a few feet off the ground, looked at curves they look ok . hardly any lift really

[GIXERMAN]

Have you calibrated tx

[wiseman]

yes TX calibrated all tx to heli controls are good

[jamiesawyer28041978]

Your not alone mate. I'm the same tonight with a different tx. Cant get my idel up to kick in so I can practice some 3d. Going inverted and trying to hover when throttle is dying is a pain in the butt !!!

[johnsandywhite]

Your not alone mate. I'm the same tonight with a different tx. Cant get my idel up to kick in so I can practice some 3d. Going inverted and trying to hover when throttle is dying is a pain in the butt !!!

Have you changed the Throttle curve on the Pheonix Tx Channels?

[wiseman]

bit of an up date, reinstalled the sim and recalibrated and copied the set up of my trex450 to the sim channel, not sure if that's the correct way but every thing seems to fine now.thanks for your help

[jamiesawyer28041978]

Have you changed the Throttle curve on the Pheonix Tx Channels?

Thank you also..Throttle curve was the problem