NeXt sim and DX9

[paul 5ive-t]

hi guys, a friend of mine just getting into heli's has just got a spectrum dx9 and next sim, I set tx up, and on setup when you hit throttle hold it cuts the pitch aswell, when we go to setup and you see which channels are active there is no response from the pitch channel and it is like the pitch is on the throttle channel, any ideas?

[coolice]

Hey Buddy.

I had the exact same fun and games when I setup NeXt sim, but there is a trick that works.
What you need to do is before you calibrate the Tx channels, activate throttle hold so the throttle is not active. This allows the software to see the pitch channel moving and assigns the pitch to the right channel accordingly. Then release throttle hold and move your throttle stick again, NeXt should then assign the throttle channel or you may have to assign it manually. You should then have channels all working correctly.
.

[paul 5ive-t]

Cheers m8, will give it a whirl.