RC System Minicopter 4 channel controller and FMS

[petemillis]

I'm pulling my hair out here. I've installed FMS, I've installed PPJoy, installed new hardware via Win XP, but when I try to calibrate the controller in FMS I'm stuck. It ain't playing ball.
has anyone successfully set this controller up with PPJoy and FMS? The lead was in the pack with the heli, and the din socket is on the TX so I assume it should work and not just be in the box for show!
Cheers
Pete, Brighton

[Ade_Law]

if you cant get your interface to work. take a look at Jsim.

http://www.rc-electronics.co.uk/

but... really you would be better off getting a proper simulator such as phoenix.. which will be out soon, i promise!

Ade

[ghyuheli]

You can try these setting:

Sim setting reference: http://www.hobbyjapan2000.com/SimulatorSetting.html

http://www.hobbyjapan2000.com/SimSetting-Gil.html

You may also want to read the forum from www.flying-model-simulator.com too for other configuration.

I'm pulling my hair out here. I've installed FMS, I've installed PPJoy, installed new hardware via Win XP, but when I try to calibrate the controller in FMS I'm stuck. It ain't playing ball.
has anyone successfully set this controller up with PPJoy and FMS? The lead was in the pack with the heli, and the din socket is on the TX so I assume it should work and not just be in the box for show!
Cheers
Pete, Brighton