Pitch setting!

[cabbie10]

So how do I get even pitch? IE +11 & -11? at the mo I have +11 and -4 I tried adjusting the TX (DX8) but even going to -150 on the trim only gets me -6.2!

[electricsceadu]

we need to know what model
what the pitch curve is in the tx
if it is an eccpm control what are the swash values
is the servos set at 90 deg at centre stick with 0 deg pitch
are the control rods set near enough to the std manual lengths
are the servo balls set in the correct length on the servo horn

[GIXERMAN]

Are you doing in workshop with pitch gauge enabled

[cabbie10]

Sorted now, adjusted the end points in the TX set up