Limiting servo {retract } travel.

[pipercub]

Hi All,

I have a field force 10 transmitter an 8 channel receiver, which channel do i use so that i can limit the movement of the servo, if i use channel 8 and assign a switch i cant regulate the amount of movement.

[sacko]

You answered your own question?

Can you not stick it on channel 8 (Aux2) and use the endpoints to limit travel.

[xygax]

You should be able to change the end points on whichever channel you assign to the switch thereby limiting the travel.

Steve

[pipercub]

no it just wont limit on channel 8

[express]

if it a retract servo you will not change the end points you will only change the travel with a smaller or bigger servo disc

[pipercub]

Yeah i can see that now it's all about gearing thanks gary and thanks too you all.

[johnsandywhite]

if it a retract servo you will not change the end points you will only change the travel with a smaller or bigger servo disc

Took the words right out of my writing hand. I had this problem on my Mick Reeves Hurricane. Adjust or change the servo arm until you get the correct amount of movement.