T Rex 700 in scale body

[sje141]

Hi guys
I am wanting to use the 700 e mechanics in a scale body. However the tail boom is about 2 inches too high. Does anyone know of a method or parts on the Market that will enable me to-lower the tail output shaft on the mechanics
Thanks stephen

[d a baker]

big hammer.jpgSorry about this reply, I just needed some light relief after reading " racist woman" but technically this would work

[electricsceadu]

it all depends on what scale body you wish to fit it into
it could be as simple as re-making the woodwork at the base of the body
or the other extreme of trimming the bottom of the mechanics down or having a drop down gear assemble made to lower the tail drive

[chris jones2.4]

andy johnstone managed to get a 700 in a body, hmmm

[electricsceadu]

i know of a 700n in a jet ranger
and the hughes 500 is a great body as most heli's fit it

[dannyhough]

Looking at this......https://www.scaleflying.com/700-Size_c_115.html.... there are limited fuses for 700 helis, these are Smartmodel fuses sold by RC aerodyne also available here....scaleflying.de - 700er Größe..... (european branch of SM). Kits from SM generally come with everything you need to fit and as far as i know they are all based around the Trex models or rather the Chaos which is a Trex clone.