Jr schweizer 300

[electricsceadu]

seeing the build thread
make sure you check the fuel tank nipples are clear
i had one on my vigor that was only 1/4 open (and yes it did cost me a piston)
run a small drill through them to be safe

[wimbledon99]

seeing the build thread
make sure you check the fuel tank nipples are clear
i had one on my vigor that was only 1/4 open (and yes it did cost me a piston)
run a small drill through them to be safe

Will do - Cheers!!

[Boggy]

problems??

are your rods too short??



your build thread is open btw

[wimbledon99]

problems??

are your rods too short??



your build thread is open btw

Hi,

I thought I had a problem with the washout but after delving into the 300 kit I found the answer.

Thread was open as I was trying to upload a picture of the solution but it was taking forever. Will try later when site is not so busy.

Cheers

[Boggy]

looking realy good. absolutley brilliant build thread. good luck with the maiden flight

[p4ddy]

That thing will look the dogs sack if it gets a 3 blade head

[wimbledon99]

looking realy good. absolutley brilliant build thread. good luck with the maiden flight

You are too kind - Cheers

[wimbledon99]

That thing will look the dogs sack if it gets a 3 blade head

A pal of mine keeps telling me the same thing

I've never tried anything other than two blades so I'm tempted to have a bash!

Will get her in the air first then look at possibilities.

Cheers