Md530

[Adrian]

Hi all
Just started to build the md530 and want some long heat deflector so the exhaust comes out at the rear like the real thing,any body know where to get ant, needs to be about 300mm.

[Boggy]

john at DMHC has just built one he used ordinary silicone tubing! ill ask over the w/e where he got it from(unless chrisB see's this post he will know)

[Adrian]

AWW nice one would be good to know where he got it from and any other tips as i see on a thread somwhere else that sombody said the skid holes at the back of the fuse are not the right distance apart!! ,dont know if this is right but would be good to know b4 i start it.

[Boggy]

yep he did have to struggle to get the legs in( the steps are different height or something that will give you a clue as to which fit where!) make a list of questions and ill ask. i dont think he posts on here! but i know he does look sometimes

[Adrian]

ok thanks 1 ,do i still cut out where the legs go in the fuse where there marked.
2 where do i get the silicone pipe.
3 do i have to add much nose weight if needed.

ill prob think of more over the weekend
ron