Finally happy with 600efl pro set up.

[Nick B]

Took a while to fine tuned and now im happy with the ice 80hv and vbar settings.All 4 of my vbars feel great now after reducing main rotor gains and the 3 with cc controllers have better settings of the motor and gov gains.

Quick vid of the 600,spinning 2200 on the head

[aro03]

Could you summarise how you tuned the governor for optimum performance? I've just started playing with mine and have left everything on default.

[simon1]

nice flying mate, surely you have entered grass roots?

[cupracing]

nice flying mate, surely you have entered grass roots?

He is too good for Grassroots IMO

Sweet flying Nick, youre definitely improving!

[chris jones2.4]

sweeeet!

[Nick B]

Could you summarise how you tuned the governor for optimum performance? I've just started playing with mine and have left everything on default.

Basically I've flown it where the gov struggles so played with gain values to much where i should of tweaked motor settings.On my phone at the moment but will post up my settings later

Thanks for your comments,waiting on a better keychain cam and had to use a crap one

[simon1]

He is too good for Grassroots IMO

Sweet flying Nick, youre definitely improving!

true

[t-rex pedro]

Nice flying Nick! Got quite a bit in your locker there!

[Chris Boughton]

Looking good Nick Looks like much better weather than sunday!!!!!

[Nick B]

Vehicle Type:Helicopter
Throttle Type:set rpm
Governor Gain:18
Initial Spool-Up Rate:5
Head Speed Change Rate:18
Auto Rotate Enabled:True
Vehicle Setup - Battery Type:LiPo
Vehicle Setup - Number of Cells:12
Vehicle Setup - Battery Voltage:44.4000
Vehicle Setup - Gear Ratio:8.6154
Vehicle Setup - Pinion:13
Vehicle Setup - Spur:112
Vehicle Setup - Motor Kv:510
Vehicle Setup - Motor Number of Poles:10
Desired Head Speed 1:2008
Desired Head Speed 2:2100
Desired Head Speed 3:2200


MOTOR
Motor Start Power:Medium (59) (default)
Motor Timing:Normal (5)
PWM Rate:8Khz

[sirricardo]

Nice, I must get one

[Eckchaz]

Vehicle Type:Helicopter
Throttle Type:set rpm
Governor Gain:18
Initial Spool-Up Rate:5
Head Speed Change Rate:18
Auto Rotate Enabled:True
Vehicle Setup - Battery Type:LiPo
Vehicle Setup - Number of Cells:12
Vehicle Setup - Battery Voltage:44.4000
Vehicle Setup - Gear Ratio:8.6154
Vehicle Setup - Pinion:13
Vehicle Setup - Spur:112
Vehicle Setup - Motor Kv:510
Vehicle Setup - Motor Number of Poles:10
Desired Head Speed 1:2008
Desired Head Speed 2:2100
Desired Head Speed 3:2200


MOTOR
Motor Start Power:Medium (59) (default)
Motor Timing:Normal (5)
PWM Rate:8Khz

Nice flying again Nick

Thanks for the info as Im just venturing into the world of Vbar..

[Nick B]

Nice flying again Nick

Thanks for the info as Im just venturing into the world of Vbar..

On the fusion??

if so,can post settings for that as its same motor and esc

Also the vbar settings if you wish

[Nick B]

PS,you can higher the pwm to 12 or higher for even better performance but the esc does get really hot,you dont want to get a cc controller hot,believe me

[dszabo]

Hi BladeStriker,

I would be interested to see your vbar settings for the 600efl, any chance you can post your setting file?

Cheers