Loving this HK 500

[tiddler]

My second proper outing with my recently acquired HK500 GT

Oh and thanks to Trillian for catching a bit of vid for me

[simon1]

I have been thinking of taking a punt on one of these for a while, I think the 500 is a great size heli. What setup do you run with it Graham and nice flying

[Streetluge Chris]

Great few mods here and there there a bargin.
But the clone basher's and police will be here soon to tell you there pants.
Where's the video?

[tiddler]

I have been thinking of taking a punt on one of these for a while, I think the 500 is a great size heli. What setup do you run with it Graham and nice flying

That was using a zippy 2650mah lipo running a Turnigy 1800KV 500 Size Motor and a Turnigy 85A 2-6S ESC w/ 5A BEC. with a Spartan DS760.
I've also got a Turnigy 3000mah pack that I've not really pushed much yet, so will have to see how that goes.

This thing may be a clone, but as far as I'm concerned it flies like a dream

[Kozmyk]

Good job escaping that UFO that was chasing you.

[tiddler]

Good job escaping that UFO that was chasing you.

I know, that thing chases me everywhere . You'd think it was a fingerprint on the lens but its been cleaned over and over, so can only assume its a fault on the sensor plate thingy, or whatever its called

[heliboy]

Glad your liking it matey)

[loz]

nice flying graham hopefully ill be able to do that one of these years lol

[trillian]

Well, the autofocus works some of the time anyway

I forgot to warn you about the gratuitous zooming, I was not used to the
zoom lever on there.

I like the travelling forward flip


---just to add, I am also loving my 500. It's the basic silver frame version, belt drive tail, stock Align airframe,
Align DS510s on the swash and DS650 on the tail, Turnigy 85 amp ESC, motor is a 1600kv of unknown brand
but works great, Turnigy 6s 2650mah Lipos, white 3D Pro carbons from Hobbyking. The only thing I have
changed is the tail blades to KBDD and I think they are a bit better than the stock blades as I
am not running a crazy headspeed.

[Kozmyk]

I know, that thing chases me everywhere . You'd think it was a fingerprint on the lens but its been cleaned over and over, so can only assume its a fault on the sensor plate thingy, or whatever its called

I think it's cloaking device needs recalibrating ... do these aliens know nothing??

[Tridztan]

Nice flying Graham. Glad to see it's all setup and you are enjoying it.

[robbo45]

i keep hearing that the hk are made of rubbish materials but the last align sport i brought was the worse kit i ever put together ,bolts rounding of and bit not fitting together properly and it never flown as well as my 450 se or i just been unlucky

[maderdog_1024]

i keep hearing that the hk are made of rubbish materials but the last align sport i brought was the worse kit i ever put together ,bolts rounding of and bit not fitting together properly and it never flown as well as my 450 se or i just been unlucky

All mass produced at cheapest price.!

Had hk450 seemed good enough ball links didn't fill me with confidence but did the job.




Sent from my iPhone using Tapatalk

[pDidd]

Nice flying, sounds like you have a jet engine installed at the start!

[bolders]

Nice one Tiddler - its comin along very nicely

Tiddler & Trillian - Do you have any plans for a little gathering at Richmond park this summer. We could compare 500s lol