If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
if you can turn auto focus off and use manual focus instead you will normally find you don't need to touch it as long as you don't do any zooming in. That stops all the focus searching when you go high or out of shot. Nice flight by the way James
if you can turn auto focus off and use manual focus instead you will normally find you don't need to touch it as long as you don't do any zooming in. That stops all the focus searching when you go high or out of shot. Nice flight by the way James
Aaah... cheers Ash
Will give that a go. Always wondered how vids had a more broad focus without searching for focus on the heli
Thanks Ash, when i get the torque tube replaced i will do another and up the pase a bit, had a slight issue with my lad sitting on the torque tube and it was slightly bent that was causing a vibration so the tail was not no way 100% so kept the flight to the general manovers and there was a strong head wind that was putting me off also.
Hopefully next weekend i can get it dialed in better and do another video.
I do have to say i am liking this heli now, and i managed 2 full flights this weekend thats a first
James Sponsored by Align-Trex.co.uk Optifuel/optipower MKS servotech
James, as with all new heli's you have a shake down period, mine was 6 flights while various bits worked loose, chaffed or showed up issues in my build. Since resolving all my small errors (and suffering a one way failure, not my fault!) it is now flying sweet. If I actually manage to get to a field anytime soon I'll also be doing some video, if not mine should be viewable at 3D champs as I am down for a couple of demo flights.
Thanks guys.
That video was taken with the first time i have managed a full flight with it due to one thing or another, probably had only been in the air 6 mins before that flight but is great to fly, just want to get it perfect before i push it more, hopefully should have the tail issue sorted by wednesday
James Sponsored by Align-Trex.co.uk Optifuel/optipower MKS servotech
Yeh it is Matt, have had a couple of issues, but these should be solved in the batch 2 kits, mine was a batch 1.
Is lovely to fly, just keeping my fingers crossed it is reliable
James Sponsored by Align-Trex.co.uk Optifuel/optipower MKS servotech
If people are after one of these I know Blink is doing a deal on them at 379.99 and is offering 15% off all V50 spares currently, I believe they have some that were not pre-orders that are waiting for owners (batch 2)
Comment