Electric motor

[Reltub]

Hi guys i unplugged the motor on my century kds 450 to set the head up, ive plugged it back in and nothin happens when i try to start it, probleb is all the cables from te motor are the same colour ive tried different configs but nothing seems to be working.

Thanks

[Reltub]

Electric motor

Quick update when i put throttle hold on the heli starts up and i have no control i have to flick it back to stop it?

[Reltub]

Electric motor

Sorry when i pit throttle hold on it stops when i take it off it goes to full rate

[Cagey]

Sounds like you need to programme the ESC correctly. With the blades OFF, or the pinion disengaged and no servos plugged in just in case things go pear shaped on you.

[Reltub]

Electric motor

Ive got the blades off i dont think you can programme this esc, it did used to work untill i started a new model memory and set the head

[Cagey]

Ive got the blades off i dont think you can programme this esc, it did used to work untill i started a new model memory and set the head

Have you tried it on the old model memory ? If it works on that, then it's your new model settings that are at fault. Regarding the ESC, most can be reprogrammed, once you know the make and model you can google for instructions.

[dillwhacker]

Have you inadvertantly left it in idle-up?

[Reltub]

Electric motor

No idle up is off :/

[nobbycopter]

Electric motor

Is your throttle channel reversed?

[Reltub]

Electric motor

Ive sorted it ive put the old model back on and erased all values manually. I have also realised why it didnt work on the other memory its because i had it in left hand mode not realising.

Thanks for all replies

[Cagey]

You're welcome sunshine.

That's what this forums for buddy, bloody good innit ?

[Reltub]

Electric motor

Cheers pal! Yeah its great hopefully ill be able to understand the set up side 1 day!