fms 6ch tx setup

[mattydred]

i have a 4ch usb controller/tx for my fms sim and i have it setup perfect.
however - all the newbies that have bought boney bee cp2, king2, belt cp etc should have the fms included and a usb lead to connect your 6ch tx to the pc. i tried to help puppy setup and calibrate his 6ch transmitter that came with his king2 but with no luck. this is because of the ccpm tx. ive looked further into this for people who are pulling their hair out because they cant get it to work.

here is 1 solution
To get it working on the 0406 transmitter (that comes with the cp2 in the uk)
Open the battery compartment, remove battery #3. Underneath you will see a recess with two dip switches behind. Switch dip switch #1 on.
Recalibrate your chopper. Each stick movement along each axis should now result in a single axis movement in the calibration screen.
Don't forget to put the dip switch back when you fly your chopper.

or - check out the thread where the above solution was originally posted
http://n-old.ethz.ch/student/mmoelle...pic.php?t=3924

[mattydred]

you read this yet dan?

[Puppy]

worked a treat mate, thanks a lot, however the sim i am using at the moment i can hover all day. hover in vert.

However it is not actually anything like flying my heli for real. The only thing i can see myself learngin from it is orientation.

[mattydred]

dan - put abit of wind on and have it slightly out of trim on the rudder and cyclic

[Puppy]

yeah all my trims are a ittle ****ed, i give them all a little knock each time i reset. Ill put some wind on tonight and give it another go.

really need to get my real heli in the air :P