JR DSX 11 switch assign?

[Paulig]

I want to swap the throttle hold to the switch just in front of it for easier access. How do you do it???? Looked at the manual and just can't seem to do it???

[mark Taylor]

Go into system settings
select device select
Go to TH and assign to the switch of your choice

[Paulig]

Tried that but still does not work? I'm doing something wrong but not sure what. I've done a little video to see how I'm doing it. The orange switch is the one I want as Throttle hold....
http://www.youtube.com/watch?v=92LPD5rUiSc&sns=em

[mark Taylor]

Is that front left switch you want to use rudder DR or any of the aux switches ??
sorry don't own an 11 ,only a 9 & 12,

[WOODSTER]

Go to divice select high light aux6 then just move the switch you want and it will do it for you.

[Paulig]

Go to divice select high light aux6 then just move the switch you want and it will do it for you.

That's exactly what I did in the video? Is it the highlighting bit I'm doing wrong?

[Paulig]

Is that front left switch you want to use rudder DR or any of the aux switches ??
sorry don't own an 11 ,only a 9 & 12,

I think it's DR.

[WOODSTER]

When i do the same as in your video my 11x changes to rudd sw and is the same as yours.

[WOODSTER]

Think i have it, go in to thro hold in the list then switch sel and change the rudd and unselect the hold.


test it on the mspx it works.

[Paulig]

Think i have it, go in to thro hold in the list then switch sel and change the rudd and unselect the hold.


test it on the mspx it works.

I think i followed your instruction correctly but still having a problem assigning it? I thought this was one of the new simple features Horizon Hobbies where touting? It's not.....

[Stanley Speel]

What you're doing there is assigning the AUX 6 channel to the throttle hold switch - there is no "aux 6 switch'. You have to go to the throttle hold menu and do it from there - so leave it as is then go to the TH menu and assign the throttle hold to the aux 6 channel. If I'm wrong I'll be able to let you know in a few hours when I have my DSX11 in front of me.

[WOODSTER]

WP_000830.jpg WP_000831.jpg WP_000832.jpg WP_000833.jpg

Taken some photo,s of what i have done :-) ( three way switch on the rudd).

[Paulig]

Thanks for that, it worked!