Announcement

Collapse
No announcement yet.

Help please

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help please

    Hi have have a hirobo sceadu with a spektrum ar9000 rx gy 401 gyro align ds 650 tail servo an am using a jr pcm9x2 tx. Basically the rx signal keeps randomly dropping out for a few seconds and reconnecting also when the rx is connected the gyro light starts flashin even when the heli is sat on the bench, we have tried different rx different gyro and a different tail servo. The Thing we are goin to try next is to create a new model on the tx and see if that makes a difference other than that the only thing rlse we can thunk is the tx is faulty but it was serviced by jr in jan. any help would be appreciated.

  • #2
    What are you using to power the rx, gyro and servos? Try changing that.
    Mikes Place - Home of the golden dump.

    Sponsored by Elite Models.
    http://www.elitemodelsonline.co.uk/

    Comment


    • #3
      Just a nimh battery can remember the size its at ny nates hes been looking at ut with me m, will pop round later

      Comment


      • #4
        As I thought... an old nimh or nicd flight pack can drop its voltage under load even when freshly charged. If it drops below 3.3v I believe the rx will reset. Try a different pack.
        Mikes Place - Home of the golden dump.

        Sponsored by Elite Models.
        http://www.elitemodelsonline.co.uk/

        Comment


        • #5
          Ah i see sounds like it could sort it will let you know mate

          Comment


          • #6
            Can u recommend a good battery please?

            Comment


            • #7
              You need to confirm it is the problem before looking at spending money on a decent pack, or power system. Borrow a pack from something else.
              Mikes Place - Home of the golden dump.

              Sponsored by Elite Models.
              http://www.elitemodelsonline.co.uk/

              Comment

              Working...
              X