Hirobo sceadu setup

[Reltub]

Newbie here, i have a sceadu shuttle, the problem ive got is my mates pcm9x tx is set up for it and ive been using his as i was waiting for my pcm to arrive, now its here and i cant get hold of him is it possible to get settings fir the tx off the net?

Thanks

[Steve]

No is the simple answer.

If you can get your mate to turn up then you can copy the model data from one Tx to the other using a buddy lead.

Otherwise, just start from scartch with a new model. If you've never done it before then it will be a good learning experience. Be sure to get someone at the field to check it over from top to bottom and front to back before attempting to start it.

[electricsceadu]

the other way if you haven't got a buddy lead is to turn both tx's on and set the new tx up to the same as your mate's one

and don't forget if they are 2.4ghz is to bind the new tx to the rx