more resolution for fbl?

[Cuppa]

It would seem that in order to increase the movement in the cyclic servos for fbl on Trex 700n 1, use the inner hole on servo horns 24mm, not quite enough, so spotted that align do aile levers with an extra hole HN7034BAT thay also do an ele 'A' arm set HN7033QFT for 700n but without the extra hole to match the aile levers! unless you use the 700E one (that has x2 holes) and swap the E 'A' arm with the N 'A' arm thay are not the same! you follow me? so why have align not produced same for 700n? or are we supposed to use the 'E' version and bin the E type 'A' arm??? thats nuff or i'l end up in A&E lol

[Andy from Sandy]

I think the better option on the 700 is to move the ball out, that is further away from the mast, on the blade grips. This leaves the geometry correct on all the linkage rods from the servos to the levers to the swash. This might require making something or getting different blade grips. I did some parts but I can't remember where I saw them.

[GravityKills]

for example the mikado blade grips extensions for conversion of the standard FB grips use about 38 mm arm length to the balls (in other words, about 76 mm ball-ball distance, give or take some).

[Cuppa]

for example the mikado blade grips extensions for conversion of the standard FB grips use about 38 mm arm length to the balls (in other words, about 76 mm ball-ball distance, give or take some).

yep got that, i'm using the align 3G head (fixd positions!) Mmm think to get what i'm after i'l have to use the 'E' part on my existing 'A' arm.
this set up as is on my 700+beast X works well but to get the full performance from the beast X ie blue light @6 degrees it needs slightly more resolution to get there

[Paulice]

Can you fit longer ball's to your swashplate to blade grip?
The align head looks great but the geometry is not perfect for FBL.

[Andy from Sandy]

Can you fit longer ball's to your swashplate to blade grip?

It needs to be the other way round. The balls need to be moved in on the swash to get less movement up to the grips.

[Cuppa]

It is a 3G 700 head i've decided that the easyest way to arrive at what i want is to use the HN7034BAT aileron levers(two holes) and the HN7033QFT ele 'A' part with the E part spindle lever also two holes. should i think sort it. why you can't seem to get the same part for both leky and nitro i don't understand

Well i think i can now say this lil way round dose the job, re my post on the beastX forum (6 degrees blue light).
I hope this post has been usefull
would like to thank midland heli, matt, rob and nole also fastlad andy, jamie and alan for all there help and exelent advice and for supplying the parts PDQ