Announcement

Collapse
No announcement yet.

Real Bad Tail Wag

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Real Bad Tail Wag

    Havent even got the heli off the floor yet, when i lift the over corretion of the gyro/tail is bad, how do i need to attack this problem, it does it on hh and normal mode, is a futaba s3116 fast servo digy or analog? i turned the gyro down to 20% that didnt work so its back at 50%

    thanks simon
    Regards
    Simon

  • #2
    it's an anologue servo ...what gyro and what sort of wag is it ?? slow like gyro or fast like frequency ?? what gyro ??.. .also what settings on the gyro as well .. .as well as distance from centre of servo to ball link ...
    Knight 3D
    http://northeast3d.talkheli.co.uk/
    http://www.lindensflyingclub.co.uk/

    Comment


    • #3
      a few things to check, Have you got the linkage the correct distance form the center of the servo, is the gyro fastend properly, is ther any play in the tail rota assembly, also it may help if you post your model details.
      Raptor 30 V2 / OS 50SX - H / Revlock 10
      Align GP750 Gyro, Align DS620 Tail Servo
      Spektrum DS821 servos

      Raptor 50 Titan / Redline 53 / Revlock 30
      Beast X V2, Align DS620 Tail Servo
      Spektrum DS821 servos

      Spektrum DX6I

      Guisborough Model Club

      Comment


      • #4
        Originally posted by Mike W View Post
        it's an anologue servo ...what gyro and what sort of wag is it ?? slow like gyro or fast like frequency ?? what gyro ??.. .also what settings on the gyro as well .. .as well as distance from centre of servo to ball link ...
        Originally posted by max2741 View Post
        a few things to check, Have you got the linkage the correct distance form the center of the servo, is the gyro fastend properly, is ther any play in the tail rota assembly, also it may help if you post your model details.
        Mini titan
        Align gp750 gyro setup for small heli's secured well an right direction and response when tested.

        futaba s3116 tail servo 10mm from the center of servo to ball link
        tx futaba ff9

        rx 35mhz 7ch

        hs 55 swash servos

        its a rapid side to side motion,

        i need help lol
        Regards
        Simon

        Comment


        • #5
          me thinks its the tail servo then .... have you got another one you can try to rule it out ???
          Knight 3D
          http://northeast3d.talkheli.co.uk/
          http://www.lindensflyingclub.co.uk/

          Comment


          • #6
            Originally posted by Mike W View Post
            me thinks its the tail servo then .... have you got another one you can try to rule it out ???
            unforunatley i havent. i have to wait till next week till payday for a servo.

            simon
            Regards
            Simon

            Comment


            • #7
              you can play about with the settings in the gyro to change it from digi to analogue and try some delay ..if that dont work then get a nice 9257 tail servo
              Knight 3D
              http://northeast3d.talkheli.co.uk/
              http://www.lindensflyingclub.co.uk/

              Comment


              • #8
                I've a Mini Titan SE with a S9650 and 401 on her, absolutely loverly to fly,,,,,,,


                ,,,,which is good as I've yet to get beyond side-on

                Comment


                • #9
                  Simon .. where abouts in Grimsby do you live ?? ...
                  Knight 3D
                  http://northeast3d.talkheli.co.uk/
                  http://www.lindensflyingclub.co.uk/

                  Comment


                  • #10
                    Originally posted by Mike W View Post
                    Simon .. where abouts in Grimsby do you live ?? ...
                    just off carr lane.
                    Regards
                    Simon

                    Comment


                    • #11
                      sounds like he could use a bit of your help mike to show him the ropes a little, although isn't gain of 50 on hh a little low, i know im on spektrum, but i get worried on hh if mine is below 90%
                      Kev




                      Comment

                      Working...
                      X