Tweet
Just wondering what gys use for setting up your helis on the bench. for my pro ive always just plugged in one of the lipos and my 600 was easy because of the inbuilt reg but on the 550 I dont have this and dont want to use a big 6s battery.
-
Goblin 700
-
4.8v 2000mah nimh reciever pack
just plug it into the rx
-
Originally posted by Boggy View Post4.8v 2000mah nimh reciever pack just plug it into the rx
Same here, just an old 4.8v pack plugged straight in - means I can do the setup before finally routing the wires, it also keeps the main motor from spooling up if I knock a stick or try to adjust the curves etc.sigpicX2Comment
-
Ditto!Originally posted by Boggy View Post4.8v 2000mah nimh reciever pack just plug it into the rx
Martin
Most of the Aligns, fair few Spektrum bits, bunch of Align & HiTec servos, OBE, VD & Bar.
Comment
-
Same again. I usually put a Y or extension cable in so that I can just plug in if access to the Rx is awkward.Phil
"Be who you are and say what you think...
Because those that matter...don't mind...
And those that mind... don't matter"
Blade 130x, Park Zone Mini Sukhoi, EDF F16 thingy, some Gliders and some broken stuff
Comment
-
would the top one on this page be suitable, what is a HI-MH?
Vapextech UK Ltd RX / TX Power Model Control BatteriesGoblin 700
Comment
-
It must be Russian.Originally posted by cupracing View Post
Their "N" is written "H".
But then they don't have an "H".
Confused?
You will be.Koz
TotalRelative noob
Logo 400, TRex 450SEv2, Blade 400, mSR, mCX, HK450(build), DX7, Phoenix Simstick ..... AXN Clouds Fly, Night Vapor, HC Mosquito
I've found a way to halt reckless heli spending ... Go Broke.
Comment
-
I use a 6s but unplug the esc so just the bec is in so no power goes to the motor (is this right lol) i unplug something anyway.Yes the big sigpic is coming backComment
Comment