align rce-g600 magnet compatibility?

[Supercaptaincrash]

is there any reason why the align governor cant be used with different manufacturer magnets?reason im asking is my raptor 90 fan already has magnets fitted so was hoping to setup with these!

[tonystevens]

shouldnt be a problem Andy unless the magnet needs flipping over

[Supercaptaincrash]

Thanks tony! couldnt see there being a problem but better to check eh!

[Steve]

Align governor only detects one pole of the magnet. The destructions tell you to stick both magnets in, opposite ways up, so you are guaranteed it will pick up one of them. If your new heli has only magnet in it already, you'll have a 50/50 chance that it will be the right way around. If not, you'll have to get it out and turn it over.

Very carefully drill through from the other side with a 1.5mm drill, taking care not to drill the magnet itself. Then tap it out with a drift pin and a little hammer.

[robgt]

Make sure it only sense one magnet and all should be fine
Cheers,
Rob