Announcement

Collapse
No announcement yet.

PCM9X2 & gyro advice

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    PCM9X2 & gyro advice

    Hi all,

    After not having to mess with the setup of my heli for a couple of years I now need to make some tweaks. I've gone 2.4GHz on my PCM9X2 and bought an AR6200 for my T-Rex 450S. The old 35MHx RX was a 7 channel but the 6200 is only 6.
    I have a feeling I've bought the wrong RX as the gyro gain needs to go in Aux2 (ch7) on the PCM9X2. Its a telebee 201, yes I know its not great but suits me for now.
    Is there any way of doing gyro gain on the gear channel on the PCM9X2 or am I stuffed ?

    TIA

    Ed
    Tags: None
  • #2
    Yep, just plug the gain lead into the gear channel and adjust using the end points.
    Velocity 50
    Synergy N5
    Fury 55 FBL
    Trex 700

    Light travels faster than sound, this is why some people appear bright until you hear them speak....

    Comment

    • #3
      Like fixxer says, and also disable the gyro sens function in the initial setup menu.
      JR Vibe Fifty fb (YS56)

      Comment

      • #4
        cool - cheers guys, only niggling thing I have at the back of my mind is that I seem to recall the telebee instructions specifically say to not use endpoints for gain control?!?! can't find the instructions on the web and at work atm so can't check.

        Comment

        • #5
          It should be fine. Destructions here - http://hbfpnl.files.wordpress.com/20...yro-manual.pdf
          Velocity 50
          Synergy N5
          Fury 55 FBL
          Trex 700

          Light travels faster than sound, this is why some people appear bright until you hear them speak....

          Comment

          • #6
            ah - think it was endpoint to set servo travel that was a no no....

            Thank you !

            Comment

            Previous template Next
            Working...
            X