servo setup help

[Grant85]

Alright,

I'm just looking for some help on getting my servos setup so they are at 90 degrees when the collective stick is at centre.I have been watching the Finless Bob videos and there he says to make sure all the trims are centred.Does this include the throttle/collective trim? Because on my radio (DX6i) I have the trim at the bottom all the time as I thought this was only used on nitro helis? all my other trims are centred etc...

Cheers Grant.

[Andy from Sandy]

The aileron and elevator trims to centre position. The trim that is on the throttle stick is for the throttle channel only and will have no effect.

[Grant85]

The aileron and elevator trims to centre position. The trim that is on the throttle stick is for the throttle channel only and will have no effect.

Problem solved! Thank you Andy!

Cheers Grant.