rx wiring

hi guys im building my copter x and im tring to bind up with the ar6200 and when i connect the lipo to the esc the lights dont flash.this is my first build...and im sure i have gotten all the wires mixed up and i i dont know which side is pos and neg and which wire goes where...i have build the servo and gyro etc already just the wires are all mized up on the rx

[3Dheliflyer]

ive done the wiring like they shown on another website and when i connect the lipo theres no light flashing on the rx.

[3Dheliflyer]

Get me started guide DX6i & AR6200 REC - Heliguy.com

[Kwickkwack]

Firstly, have you got the bind plug in the correct place, then power up the rx the lights should flash, you then turn on the radio whilst holding in the bind button on the radio. I personally bind all my receivers first before connecting them to the heli so i know there are no faults before I start

[3Dheliflyer]

ok im at work now i didnt put the bind plug in ...also when i turn the polarity around and then connect lipo the light stays solid amber

[3Dheliflyer]

also i got another question i got another heli coming and i want to use that with dx6i . So if i bind that heli shud i select another model and rename it trex and then switch of the tx and go through the binding process?? Appreciated .

[sacko]

Yes and reset up the transmitter.

[machasm]

As Sacko said, you will need to rebind to the new model. You will be using a different rx on the new model wont you? i.e. you wont be transferring your existing rx to the new model.
Adrian.

[3Dheliflyer]

of course yeah mate i got another ar6200

[3Dheliflyer]

hi there guys thanks all i binded it up all controls work now to connect it all up

[3Dheliflyer]

help please [ame="http://www.youtube.com/watch?v=LGELycG_-4M"]YouTube- copter x[/ame]

[Boggy]

that set up is totaly wrong dude your left stick is down and your servo arms are level!!! you really need to do some homework first

your also messing with it with the motor connected thats bad!!!

[heliboy]

Disconnect the motor first wasir.....

Then go on youtube and search for 450 heli set up on dx6i..

and watch some videos...

BUT PLEASE MAKE SURE YOU DISCONNECT THE MOTOR FIRST PLEASE>>

[3Dheliflyer]

thats great man thanks alot for the help and tips!

[3Dheliflyer]

guyes is this correct wiring,looking at heli in front of me using ar6200.

the left servo goes into aileron
the right servo goes in to aux 1
the servo that is in the middle meaning after the 2 servo but close to them goes to elev.
gyro is in the rudder and gear esc is the throttle,