Idle up - 600e

[maderdog_1024]

I have just set up my idle up curve as follows;

85% throttle throughout

pitch linearish 0,25,50,75,85
low -9
mid 0
high +9

is 85% enough ?

mike

[Dashik]

Like I said mike. If your hovering around it should be fine. You might want to set the top of the curve to 100% so you get
85-85-85-inh-100.

That way you should avoid bogging the head.

[Made2Fade]

i use flatline 90 in idleup1 and flatline 100% in idelup2. Normal is purely for spoolup. Some would set normal to 0,90,90,90,90. It dont bother me too much though as i flick straight into idleup and let the smooth start on the Align ESC do its job.
Cheers
Lee

[Made2Fade]

That way you should avoid bogging the head.

Not that its hard to do with that particular heli... unless your on an 8/10S setup like lol

Cheers
Lee

[maderdog_1024]

will just go for 90% then

[Made2Fade]

What pinion ya using... just the stock one?

Cheers
Lee

[maderdog_1024]

stock but helical

[Made2Fade]

Yip defo want flatline 90 and 100. Ive just gone up one on the pinion and its much better but before i did that i was finding that i was flying around in idleup2 (flatline 100) all the time. Now i actually change in and out of idleup occasionally.

Cheers
Lee

[maderdog_1024]

okay i tried 85% and that was too slow, actualy slower than my normal curve at 3/4 stick

95% was almost right, but i have set it to 100% flat line

[Dashik]

So hows it going then? You like the 600?

[maderdog_1024]

So hows it going then? You like the 600?

yeah done another few bats yesterday.

was doing nose in and banked turns with it at 100% throttle, anything less and it struggles a bit.

really smooth to fly and stable

hows the 500 ?

[Dashik]

Not bad as you can see in my other thread