Announcement

Collapse
No announcement yet.

Blade 400 set up issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Blade 400 set up issue

    Can anyone help please, although I'm miles away from flying her yet. Thought I test my blade to make sure all the controls work etc. It should have been RTF. But when I turn transmitter on, then connect the battery as shown in the instructions with the blade & spektrum. The gyro stabalizes (thinks that what I should say) ie red light on, but when I move the controls on the transmitter nothing happens, but i expect to see movement etc. any idea/help would be greatly appreciated
    Mark

    Blade MCX S300
    NEW - Gaui 200V2
    TREX 450se V2
    Blade 400 3D
    (Evil Chicken Killer with blood on her blades)

  • #2
    may be an idea to try re binding the tx. its in the manual how to do this.
    Blade 400 3D
    Futaba S3153 tail servo
    DX6I
    phoenix
    I will not be buying any more carbon parts until I can fly
    Current status:-It flies, but for how long lol

    Comment


    • #3
      will try that,just a bit nervous...got to learn though!!
      Mark

      Blade MCX S300
      NEW - Gaui 200V2
      TREX 450se V2
      Blade 400 3D
      (Evil Chicken Killer with blood on her blades)

      Comment


      • #4
        have you double checked connections although if the gyro is coming on then theres power could be that the transmitter isnt binded to the receiver or something it broken

        fiddle about

        Comment


        • #5
          just go for it fella, whats the worst that can happen,,,,,,,,oh yea,,,,,,,,,it could get a little messy, but you may as well give it a go.
          Blade 400 3D
          Futaba S3153 tail servo
          DX6I
          phoenix
          I will not be buying any more carbon parts until I can fly
          Current status:-It flies, but for how long lol

          Comment


          • #6
            i take it the throttle hold and idle up mode are in the normal positions ?

            when it initalises there should be a tone type sound from the heli.
            Mike
            www.RC-Scotland.com

            T-Rex 700G G270 DS610s GP750/DS650
            TZ Frenzy .53 Red Line
            T-Rex 600 .52 ASP
            T-Rex 600 .80 ASP 4ST

            Comment


            • #7
              Originally posted by maderdog_1024 View Post
              i take it the throttle hold and idle up mode are in the normal positions ?

              yes

              when it initalises there should be a tone type sound from the heli.
              no tone what so ever, found a video guided on you tube which I'm about to try, jut didnt want to start taking her apart yet like shown in the manual
              Mark

              Blade MCX S300
              NEW - Gaui 200V2
              TREX 450se V2
              Blade 400 3D
              (Evil Chicken Killer with blood on her blades)

              Comment


              • #8
                all fine now, rebound the tx\rx......now how addictive is that sound when you power up.......what have I got myself into!!
                Mark

                Blade MCX S300
                NEW - Gaui 200V2
                TREX 450se V2
                Blade 400 3D
                (Evil Chicken Killer with blood on her blades)

                Comment


                • #9
                  wait until you hear the blades cut the air with a little pitch, now thats addictive.

                  glad to hear you got it sorted.
                  Blade 400 3D
                  Futaba S3153 tail servo
                  DX6I
                  phoenix
                  I will not be buying any more carbon parts until I can fly
                  Current status:-It flies, but for how long lol

                  Comment


                  • #10
                    Originally posted by chally3 View Post
                    all fine now, rebound the txrx......now how addictive is that sound when you power up.......what have I got myself into!!

                    Welcome to the dark side!!
                    T3ds Gy240 S3153 with trex500 skids and trex500 fin set plus now with hybridized canopy and Mini Titan canopy body post set P# PV0816.........Now owned by MoJo have fun

                    Comment


                    • #11
                      cant wait for the flight, but patience is the key!
                      Mark

                      Blade MCX S300
                      NEW - Gaui 200V2
                      TREX 450se V2
                      Blade 400 3D
                      (Evil Chicken Killer with blood on her blades)

                      Comment


                      • #12
                        It is mate, it really is, take advice from somebody who's been there, get help, please, it can be heart breaking when she hasn't even flown and she.... well breaks. So training gear and help. You will love her though, I know I do.
                        John

                        sigpic Proud holder of an Eddie Gold Star.


                        Too many hobbies, not enough hours in a day.

                        Comment

                        Working...
                        X