Announcement

Collapse
No announcement yet.

servo setup

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • servo setup

    hi all,
    i have just purchased a twister storm and there is nothing much in the instructions on which servos go into what connections on the reciever,
    can anybody help/advise.
    many thanks
    dean

  • #2
    thats not an easy question as it depends what radio you have.

    best thing is to read the manual for your radio and manual for the heli, then tie the 2 together.

    if after you have done that its still not making any sense tell us what radio your using and we will do our best to help,

    Ade
    www.accurc.com
    adrian@accurc.com
    This is an apple free zone
    anybody can be an Arsehole, it takes real commitment, dedication and a whole lot of effort to be nice.

    Comment


    • #3
      very front servo is elevator
      tail servo goes into gyro
      top rear servo is pitch [aux channel]
      bottom rear is aileron
      and the gyro goes in gyro and gyro/tx gain goes in gear

      im certain this is correct
      my rx is 6100e

      Comment


      • #4
        that sounds v sim to b400
        Danny
        London model heli flyers

        I am learning all the time. The tombstone will be my diploma. ~Eartha Kitt

        Blade Mcx
        Blade 400 with 3 x hs65mg's, Gy401 with fs61bb tail, 450 canopy
        Yellow 600 nsp 451's on cyclic, 251 on tail with Spartan ds760 ,ds620 on throttle,Spectrum ar7100 + csm carbsmart
        Accu RC / Phoenix sims
        Spectrum Dx7se
        F16 edf
        Mavic Pro
        Spectrum DX8 dsmx
        Blade 230s v2
        http://pic7.piczo.com/Carpman68
        www.dannycablephotography.co.uk

        Comment


        • #5
          yes its for the b400 which is very similar im told to the storm

          otherwise just experiment until it works

          Comment

          Working...
          X