Announcement

Collapse
No announcement yet.

Spektrum AR7000 Rx Help

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • #1

    Spektrum AR7000 Rx Help

    Hi All,

    got a slight problem.. Not sure what some of the connectors go into,

    but i think ive got them all correct,


    ive managed to get teh swash plate to move accordingly to stick controls, but the Engine Servo rod moves, also when i increase the throttle it messes up, so im not sure,

    at the moment, here is whats connected

    Throttle: Connected to Servo that moves the Collective Tray
    GEAR: Is the other Gyro Cable
    Rudd: is Gyro Cable that connects to Ruder
    Ailrone: Connected to Servo that makes the swash goes left or right
    Elevator: connected to the servo that makes the swash tilt forward and backwards
    AUX1: is connected to the engine servo.


    So its just realling knowing the correct servo that goes in the correct Port of the RX


    Forgot to mention:

    when i increase the throttle, every other servo moves apart from the engine servo and rudder, i have also set the swashplate in the Tx to 120 CCPM
    Last edited by callum; 19-11-2008, 03:15 PM.
    "Anger and Frustration bring the best out of my flying ability.. because generally I don't give a shit either if the machine hit's the deck or stay's in the air - both will accomplish satisfaction, but most of all it exerts the feeling of flying conservatively. - Callum"

     www.callumheli.co.uk

    Tags: None
  • #2
    Throttle and Aux1 need to be swapped over Callum


    SPARTANRC Team pilot

    sigpic[IMG]http://www.rcheliaddict.co.uk/





    Comment

    • #3
      Throttle: Connected to Servo that moves the Collective Tray
      GEAR: Is the other Gyro Cable
      Rudd: is Gyro Cable that connects to Ruder
      Ailrone: Connected to Servo that makes the swash goes left or right
      Elevator: connected to the servo that makes the swash tilt forward and backwards
      AUX1: is connected to the engine servo.
      Swap the throttle & Aux connectors and you'll be good to go
      Ian

      Knight 3D
      Velocity 50
      sigpic

      Comment

      • #4
        Right ive done that

        also when i increase the throttle, every other servo moves apart from the engine servo and rudder, i have also set the swashplate in the Tx to 120 CCPM
        "Anger and Frustration bring the best out of my flying ability.. because generally I don't give a shit either if the machine hit's the deck or stay's in the air - both will accomplish satisfaction, but most of all it exerts the feeling of flying conservatively. - Callum"

         www.callumheli.co.uk

        Comment

        • #5
          That's right.
          All 3 swash servos are used for collective pitch changes, and you want the throttle to correspond to the pitch changes too.
          Ian

          Knight 3D
          Velocity 50
          sigpic

          Comment

          • #6
            Hang on a minute... Is this going in a Raptor??
            If so, you don't want it in 120 CCPM mode.
            Ian

            Knight 3D
            Velocity 50
            sigpic

            Comment

            • #7
              But they all wrong, the aileron moves aswell only when i increase the pitch and that shouldn't happen
              "Anger and Frustration bring the best out of my flying ability.. because generally I don't give a shit either if the machine hit's the deck or stay's in the air - both will accomplish satisfaction, but most of all it exerts the feeling of flying conservatively. - Callum"

               www.callumheli.co.uk

              Comment

              • #8
                Originally posted by chugga-bug View Post
                Hang on a minute... Is this going in a Raptor??
                If so, you don't want it in 120 CCPM mode.

                But it has a 120 Swash Plate,
                "Anger and Frustration bring the best out of my flying ability.. because generally I don't give a shit either if the machine hit's the deck or stay's in the air - both will accomplish satisfaction, but most of all it exerts the feeling of flying conservatively. - Callum"

                 www.callumheli.co.uk

                Comment

                • #9
                  Callum, I'm assuming this is for a Raptor? in which case it should not be set to CCPM in the TX


                  SPARTANRC Team pilot

                  sigpic[IMG]http://www.rcheliaddict.co.uk/





                  Comment

                  • #10
                    It should be 1 Servo, see page 75 of the DX7 manual


                    SPARTANRC Team pilot

                    sigpic[IMG]http://www.rcheliaddict.co.uk/





                    Comment

                    • #11
                      Im totally confused? I have a Raptor 30v2.

                      ile try 1 servo thingy
                      "Anger and Frustration bring the best out of my flying ability.. because generally I don't give a shit either if the machine hit's the deck or stay's in the air - both will accomplish satisfaction, but most of all it exerts the feeling of flying conservatively. - Callum"

                       www.callumheli.co.uk

                      Comment

                      • #12
                        The 120 setting is for a Eccpm model where 3 servos all push/pull the swash up or down together. Your Raptor uses 1 servo for pitch, 1 for aileron, 1 for elevator. Set TX to Normal 1servo.
                        Ian

                        Knight 3D
                        Velocity 50
                        sigpic

                        Comment

                        • #13
                          Your totally correct...

                          1 Servo (NORM)


                          Thanks so much!


                          the elevator is a bit low so ile try and adjust that!

                          but i thaught with a 120 swash plate that is CCPM?

                          Oh well learnt something now
                          "Anger and Frustration bring the best out of my flying ability.. because generally I don't give a shit either if the machine hit's the deck or stay's in the air - both will accomplish satisfaction, but most of all it exerts the feeling of flying conservatively. - Callum"

                           www.callumheli.co.uk

                          Comment

                          • #14
                            We will soon knock you into shape..callum..LOL..Is that better now?


                            SPARTANRC Team pilot

                            sigpic[IMG]http://www.rcheliaddict.co.uk/





                            Comment

                            • #15
                              The Raptor achievies it by Mechanical Mixing.. 1 servo for the pitch function. When people talk about CCPM or more correctly eCCPM the mixing is done electronically in the Tx


                              SPARTANRC Team pilot

                              sigpic[IMG]http://www.rcheliaddict.co.uk/





                              Comment

                              Previous 1 2 template Next
                              Working...
                              X