futaba 7c 2,4

[Boggy]

alan i know you said your local shop couldn't help but i think you really need some one to one help with this mate! try contacting flybar and arrange a meet. it is so much easier if some one can show you

[Mike W]

There's also too many variables with setting up a 120ccpm machine as well .. TBH your better off with someone in person to show you how to do it ... We could go on all night changing this and that and still not getting the desired results as what that might be good for one set up wont be the same for another ...As for the above posts ... you need to get the swash moving all 3 servos in the right direction before you move onto the next step ....

[SimonV6]

it tilts the head forward the more you move it up the head moves down and it tilts is down

Alan

when you push the throttle stick up it also increases the collective pitch, so make sure the three servo's connected to the swashplate all move up, if not reverse that servo that doesnt move up untill they all do, then they should move up and down with the throttle stick

thats the first thing to set right, check out these vids, they are for the trex4520eCCPM, but its the same as the trex600
http://www.helifreak.com/showthread.php?t=11373


Simon

[alanjayne]

all three servos work on the head is ok

its just the throttle moving the head f/b ?

Alan

[Disc]

all three servos work on the head is ok

its just the throttle moving the head f/b ?

Alan

Remove the throttle forget about it for NOW (Ignore the throttle servo) Throttle stick ie the left hand stick does move the throttle and swash together then yes normal.

Just get the swash plate moving right up and down right 1st

But as others here have said get someone local to help it's the best way, we cannot see what your doing and its best to see whats going on

[alanjayne]

i dont want the throttle moving the three axis of the head

they move in the right way with either stick
the throttle stick is over riding it?

[alanjayne]

the throttle is over riding the head

ALAN

[Disc]

i dont want the throttle moving the three axis of the head

they move in the right way with either stick
the throttle stick is over riding it?

Okay so you know and understand it

Throttle and the pitch (CCPM head servos)

ARE LINKED Throttle up should push the Swash plate up and lower the stick brings it down.

READ The Futaba 7cap manual and goto the bit bit about throttle and pitch curves should explain it.

Get local help with it I know what your thinking it isnt right but it is

[Disc]

the throttle is over riding the head

ALAN

NO It works with the HEAD

Throttle and HEAD ARE LINKED

[Boggy]

dude that is right as you move the left stick forward the throttle should move and the swash plate should rise!!( all four servo's)