Y lead connector??

[crash-test-tomo]

Hi all, im looking but cant seem to find, is there any such thing as a 2 - 1 connector for servo plugs? Basically to achieve the same thing as a y lead but without the mess of wires?
Eg. I want to connect 1 +/- bec wires on one plug and 1 signal wire for esc or gov in another plug, into 1 connector then bring a single extension wire out.... If that makes sense

Cheers
Dan

[electricsceadu]

look at the futaba style y lead

[10x]

I used some of these....
Futaba 150mm 22awg splitter lead | Component-Shop

JR 150mm 22awg splitter lead | Component-Shop

[crash-test-tomo]

Bingo! You star, looks like futaba was the word my search was missing lol
If they come with a long enough extension they will be perfect ��
Futaba Y-Harness Servo Lead EBC0024 - Nexus Modelling Supplies

[crash-test-tomo]

I used some of these....
Futaba 150mm 22awg splitter lead | Component-Shop

JR 150mm 22awg splitter lead | Component-Shop

Thank you Adrian, I guess either of those would be perfect too

[10x]

The Nexus ones look a bit on the high price side......

[crash-test-tomo]

Yeah dont they! 6quid more for the exact same connector.. Il call Penn when they open as their local but il be using connector-shop if they dont have any! Thank you very lots for the link

[chrisleematt21]

Futaba JR Hitec Servo Y Lead Splitter Wire 22awg All Types 70-600mm UK | eBay

10 for 12.80

Ignore that same price as the shop once you add postage

[askeys_heli_madness]

Or........take the signal wire and crimped connector out of the plug from the esc (lift the little black tab up on the servo plug and pull the ccrimped conector and wire out). Then push this signal cable (and crimped connector) into your other plug containing the +/- wire from the BEC. Simple. Saves on plugs, y leads and its free!

[crash-test-tomo]

The Nexus ones look a bit on the high price side......

In the interest of comparing prices, nexus are cheaper than one of our main retailers sell the futaba ones for! And fastlad dont seem to stock them

[Pj1969]

I may have one laying about as used it on my Airwolf but now sold it

[crash-test-tomo]

Or........take the signal wire and crimped connector out of the plug from the esc (lift the little black tab up on the servo plug and pull the ccrimped conector and wire out). Then push this signal cable (and crimped connector) into your other plug containing the +/- wire from the BEC. Simple. Saves on plugs, y leads and its free!

That is how it was mate. Did my head In as it just looked a mess and its a pain for castle link! I have plugs and crimpers etc here too so I could have made a y lead id just rather a nice neat little plug!

[crash-test-tomo]

Chrisleematt, postage is free dude so those look like a winner!!
Pj thats sound mate, but I do need 2 tbh! Ive made you a link by the way with the resistor you will need if you decide to use brain telemetry mate
And you Cartlidge if you see this!