Announcement

Collapse
No announcement yet.

Grease and Lubrication

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    I use a light smear of Utterly-Buttery (scooped out of my cheese sandwhich) on the main gears, and the crap moulded Align bevel / umbrella gears - otherwise I don't lube anything - just replace it if it feels rough.
    BAAAAA
    Last edited by dillwhacker; 09-12-2015, 10:42 PM.
    Trev
    Lots of different things that fly

    And happy to have FOUR shiny EGS

    Comment


    • #17
      Bringing back an older thread. It seems the RC grease is quite a bit more expensive, and I'm always running out. I use grease for packing thrust and one way bearings as well for lubing the feathering shaft. For most other things, I use oil.

      I know a lot favour the Tri flow grease, but it's harder to get ahold of.

      Is this stuff any good?
      Shimano Grease 125ml Tube

      Or this?
      http://www.halfords.com/cycling/bike...n-grease-125ml
      Last edited by Planehazza; 31-05-2016, 04:26 PM.
      Harry

      Mikado Logo 700 | VBar Neo | JR HV Servos | Pyro 750-50L | Kontronik Kosmik 160HV + buffer pack|
      Thunder Tiger G4 E720 | CGY760 FBL | BLS272SV + BLS276SV | Align 800MX Dom 440kv | Kontronik PowerJive 120HV + Opti UltraGuard |
      SAB Kraken 580 6S | Spirit FBL | BLS173SV + BLS276SV | HK4025 1100kV | Kontronik Kolibri 140LV + Opti UltraGuard |


      And a pillow for the doghouse...

      Powered by Futaba 18SZ

      Comment

      Working...
      X