3 wires from motor

[mattydred]

im trying to finish my ultrafly F16 pusher jet. every thing is done apart from connecting the esc to the motor.

the motor wires to the esc need lengthening aswell as the battery wires as the esc is mounted in the middle of the plane, the battery up near the front and the motor at the rear(pusher). this is no problem as i'll just extend the wires.

however - all of the 3 wires coming out of the brushless motor are black and have no markings on them. all of the 3 wires coming out of the esc are blue but are marked a, b and c.

i would appreciate any advice you helpfull lot have on how i should connect the motor to the esc.

thanks for reading and for the use of your brain cell/cells.;)

[heliward0]

i may be wrong but i think you just wire them up and try it if the motor goes the right way then its ok if not just swop two wires over..??

[jamiem]

what heliward0 said! just connect them up any old way, if it goes the wrong way just swap and 2 :)