just bought a radjet 800 :D

[liamm =D]

got the email from hobbyking saying its back in the uk warehouse been waiting for this thing to come back in stock since it went out about a month ago :P

now this is my first plane and its probably not the best choice to start off with but it looks cool :D and for 36 pound i arnt too fussed it it gets destroyed :P

any body els have one of these that can share some tips fir building an flying ;)

[dave j]

they fly fast and not really for a beginner on planes

[Ruston]

Hold in some up on the elevator to get it flying from launch, also get someone else to hand launch it. It'll be really twitchy for the first few feet before it gets some airspeed up, after that it should be fine and will actually really slow down nicely for landing.

[liamm =D]

[QUOTE=dave j;891213]they fly fast and not really for a beginner on planes[/QUOTE]

that should be fun then :P i will turn down throttle travel so it doesnt go frull speed to start with

[QUOTE=Ruston;891237]Hold in some up on the elevator to get it flying from launch, also get someone else to hand launch it. It'll be really twitchy for the first few feet before it gets some airspeed up, after that it should be fine and will actually really slow down nicely for landing.[/QUOTE]


thanks i will do i have bought a 1300 nano tech for it but i also have soem 2200 overlander with are the same weight so i will try them may have to trim out some foam to make them fit

with it being epo can you use normal super glue ?

[Ruston]

You'll probably need full throttle to get it launched, so don't reduce the throttle travel. Just bring the stick back once it's up to cruise speed.

Normal CA and kicker is ok on epo but I would use uhu por for a much stronger joint.