Announcement

Collapse
No announcement yet.

Local Model shop....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Local Model shop....

    Guys,

    Found out today via a mate that a local model shop is shutting down :(

    This was one that i'd get my nick naks from glow plug's /receiver batterys
    etc... Also had Raptor 30 spares. I may drop in Friday and see if its true.

    Skyline wouldn't do fuel Club buy/Bulk to me because a local shop existed.. Wounder if I can get them to know...

    Side note: Retford club has apprently gone plane only and looks like we might get a few more heli flyers as a result. Contact with one so far but you never know.
    Mark
    www.uavaerialservices.co.uk
    BNUCs - Operations certified
    CAA - Permit for Aerial Work

  • #2
    [QUOTE]a local model shop is shutting down[/QUOTE]
    Sign of the times... :(
    It sucks when you lose your local shop, I was in mine most days as I work in town and would pop in on a lunch time for a chat or to pick up something I needed etc.

    We have got to support (i.e buy stuff from...) our local model shops or they will go the same way. The internet always looks liek a good deal, but think of the service you're [I]not [/I]getting by ordering from Honkers!
    Cheers,
    Rob
    Team Align, Midland Helicopters, Optifuel, Cyclone Blades, Scorpion Motors, Thunder Power, Savox Servos, JR Propo

    | 3D Championship

    Comment


    • #3
      Hum but the shop while not bad very rarely had even a pcm receiver or decent servos or fuel been in decline for a while...

      saw it coming to be honest
      Mark
      www.uavaerialservices.co.uk
      BNUCs - Operations certified
      CAA - Permit for Aerial Work

      Comment


      • #4
        Yeah, some shops really don't help themselves, to be honest...

        Cheers,
        Rob
        Team Align, Midland Helicopters, Optifuel, Cyclone Blades, Scorpion Motors, Thunder Power, Savox Servos, JR Propo

        | 3D Championship

        Comment


        • #5
          SO True :confused:
          Mark
          www.uavaerialservices.co.uk
          BNUCs - Operations certified
          CAA - Permit for Aerial Work

          Comment


          • #6
            shocked....... not saw it coming for ages:( think i've only ever brought a feathering shaft of him he didn't have anyhting else i use:eek:
            cheers Lee


            If it ain't broke fix it until it is
            yes i'm an idiot and no i couldn't care any less

            Comment


            • #7
              I feel a new venture coming on here!!!!!LOL What you reckon Basher?
              www.lincsheli.com

              Comment


              • #8
                I'm up for it if you've got the cash:D
                cheers Lee


                If it ain't broke fix it until it is
                yes i'm an idiot and no i couldn't care any less

                Comment


                • #9
                  I think i'll pass on that one. The accountant would have duck fits....LOL
                  www.lincsheli.com

                  Comment


                  • #10
                    Time to put this into perspective even though I think we have touched base on this before.

                    Ring local model shop up wanting an os 37. They reply no but I've got an os 46 and an os 50.

                    Ring local model shop up wanting fuel. The reply. Nope but I can get some in next week.

                    Ring another local shop for an OS 37 Reply I can get one in,it will take 2 days and it will cost £139.99:eek:

                    Call SMC for os 37, they say yep got one. How much £106.99or £112.49 next day delivery (inc sat).

                    Support your local model shop yeah right......I support local model shops by mail order......Just they're not local to me. Is that a bad thing or do I have to move to hinckley or high wycombe to support a local model shop so I can stop being slated for using mail order.
                    www.lincsheli.com

                    Comment


                    • #11
                      Nobody slating anybody here mate :)
                      Just pointing out that we can't complain about local model shops closing down when we don't actually use them.

                      People will always go where there are deals to be had...
                      Cheers,
                      Rob
                      Team Align, Midland Helicopters, Optifuel, Cyclone Blades, Scorpion Motors, Thunder Power, Savox Servos, JR Propo

                      | 3D Championship

                      Comment


                      • #12
                        I must admit I don't by big items like engines, kits, and electronics from my LHS (to exspensive compared to else were), but they are freindly and I will by crap just because I am in there, like blade holders, pitch gauges, carbon rods, glow plug, fuels ect.

                        My LHS also make kits for a distrubitor and are have exstensive knowledge of model aircraft (although I sometimes disagree with what certain staff say :rolleyes:) as they have been in the game for such a long time.

                        So there are pros and cons, but it nice that they are there.

                        I suppose I support most LHS that do mail order in the UK come to think about it as I buy from all over the place.
                        Raptor 50 V3 Titan
                        OS 50 hyper-MP2 pipe-9252-401 & 9254-Rev Max-Radix600-Radix 95- Kasama Head

                        Trex 600N Pro R.I.P
                        OS 50 Hyper-MP5-9451-611 & 9256-RevLock 20-CycLock-Radix600-Align Tail Blades

                        Knight 3D
                        OS 50 Hyper-MP5 Pipe-9255-Logictech 6100-Rev Lock 20-Radix600-Radix 95

                        Trex SEV2
                        4S TP 2000-Medusa 28-40-3400 Jazz 40-6-18-GY401 & 9650-HS65MG

                        Comment


                        • #13
                          Its sad to hear about model shops closing,,I support Mr Models as much as possible probably buying 90% of my stuff from him if not more

                          But for big purchases i always look at prices overseas and they are always cheaper

                          Looking into getting a Flightpower 4900 6s evo20 pack for my T Rex 600

                          Geegar has 2 coming from overseas for £150 each which is good,,Midlands charge £200 for the same so Geegar has saved £100

                          I intend to ask Mr Models if he can give me a price for them as he is normally cheaper than Midlands on most things,,if he can do it cheaper than Midlands i may get one thru him..

                          It is annoying though as mentioned when you need a certain item like yesterday and the LHS has similar but not the one you want or can get it in 3 days or so

                          But where possible we should fully support them thru purchasing from them and recommending them to others

                          Comment


                          • #14
                            If he sells them to you and discounts them, FlightPower/FlightTech will stop supplying him it's in his T&C's. So if he does don't tell ;)
                            Phil
                            "Be who you are and say what you think...
                            Because those that matter...don't mind...
                            And those that mind... don't matter"


                            Blade 130x, Park Zone Mini Sukhoi, EDF F16 thingy, some Gliders and some broken stuff

                            Comment


                            • #15
                              [QUOTE=Smoothound;31368]If he sells them to you and discounts them, FlightPower/FlightTech will stop supplying him it's in his T&C's. So if he does don't tell ;)[/QUOTE]


                              Master of discretion me:eek: :D

                              Comment

                              Working...
                              X